Table of contents 3 Table of contents 4 Important battery and charging instructions 6 Important warnings and safety instructions 12 Getting to know your Weeler 13 Packaging contents 14 Assembly 18 Parental control and safety mechanisms Riding and throttle twist control instructions...
Page 3
Charging instructions: IMPORTANT The unit includes a smart charger. Warnings for lithium-ion battery pack 1) To charge the product: and charger: • First ensure the ignition is in the OFF position and the ignition key is taken out. • Remove the charging port cover. 1) If there is evidence of DAMAGE, BREAKAGE, OR LEAKAGE on either the •...
Page 4
8) Charge ONLY with the provided battery pack and charger. THAT THE RIDER MAY BE CARRYING. • Using a battery pack or charger other than those provided by Droyd voids the • ENSURE ONLY ONE RIDER AT A TIME. DO NOT EVER ALLOW MULTIPLE RIDERS AT THE manufacturer’s warranty.
Page 5
WARNINGS: WARNINGS (continued) : 8) DO NOT OPERATE this product while under the influence of medication, drugs, alcohol, 1) BOTH RIDER AND PARENTAL/ADULT SUPERVISOR MUST READ AND COMPREHEND ALL WARNINGS, or any other substance that impairs physical or mental competency in any way. CAUTIONS, AND SAFETY INSTRUCTIONS AS LABELED ON THE PRODUCT PACKAGING BOX, 9) DO NOT OPERATE this product while using headphones, mobile phones, or any other device ON THE PRODUCT ITSELF, AND IN THE USER MANUAL.
Page 6
6) Always ensure the rider is wearing a helmet and other protective safety gear such as goggles, As an electric rideable product, the Weeler can and is intended to move. Even when using safety gear and elbowpads, kneepads, and secure footwear. Ensure that there are no loose articles of clothing, taking all necessary precautions, the rider and adult(s) responsible for supervision may still encounter such as a scarf or loose shoelaces.
Getting to know your Weeler Packaging contents Brake cable The Weeler comes with the following items in the packaging box. Battery level indicator Please identify and locate all of the following prior to assembly: Headlight switch Brake lever Weeler electric rideable product Ignition key a.
• Position the handlebar clamp bottom half onto the frame. It is recommended that you KEEP the original packaging box, in the event that the Weeler • Ensure the bottom clamp is centered and the holes are aligned with the holes on the frame.
Page 9
Step three: Installing the ignition key cover Step four: Tightening the brake lever • Locate the brake lever and 5 mm allen wrench. • Locate the ignition key cover (attached to the frame), pre-installed ignition cover screws (x 2) and nuts (x2), 3 mm allen wrench, and 7 mm wrench. •...
The speed limit key is used to set the maximum speed limit desired by the parent or adult supervisor. The ignition key should be in the parent or adult supervisor’s possession at all times, There are two maximum speed limit settings included in the Weeler: unless the product is in use (under parental or adult supervision )
Page 11
Safety mechanisms Safety mechanisms (continued) 2) Headlight switch: 1) Slow-start mechanism: The headlight switch is located directly beneath the battery level indicator. When the product is powered on and the throttle is engaged, the slow-start mechanism To turn the headlight ON, press the headlight switch in. will automatically begin: To turn the headlight OFF, press the headlight switch again so that it’s popping out.
Riding and throttle control instructions Riding and throttle control instructions (continued) Pre-ride checklist: Parental or adult supervision is required AT ALL TIMES when the product is in use and the rider is Before each use of the product, the rider and any parent or adult supervisor must follow the pre-ride following the riding instructions below: checklist below.
Stopping and braking Riding and throttle control instructions (continued) Parental or adult supervision is required AT ALL TIMES when the product is in use and the rider 6) When the slow-start safety mechanism is automatically turned off, the throttle can then be fully engaged is following the braking instructions below: where the amount of rotation on the throttle grip controls the speed level adjustment (up to the maximum desired speed limit set by the parental control speed limit key).
Braking system Tension Nut Tension Knob Stopping and braking (continued) The product uses a rear drum braking system. Warnings: The brake is activated by the brake lever on the left side of the handlebar. 1. Note that stopping and braking distance is affected by the speed of the product, When the rider releases the throttle with their right thumb and depresses the conditions of the riding surface, and variable environmental elements.
When the product is powered off, the battery level indicator will automatically turn off. Note that Droyd is not responsible for – and the manufacturer’s warranty does not cover – services The battery level indicator does NOT turn on when the battery pack is being charged.
Tire pressure and maintenance Tire pressure and maintenance (continued) Tire pressure maintenance must always be conducted by an adult. Tire inflation / deflation: Checking tire pressure: Do NOT use pressure air supplies found at gasoline stations when inflating/deflating the tires, as they are not designed for this product.
• DO NOT USE any caustic, harsh, or otherwise potentially damaging cleaning solution. Droyd is not responsible for any injuries, damage, or legal disputes that may result from defective 2) Check that the brake lever, frame, handlebar, accelerator lever, seat, footpegs, and kickstand tire sealant/additive products, improper application of them, or any subsequent failure affecting the are all securely in place.
Page 18
• Please contact customer support for more information. (Droyd is not responsible for any damage, defect, failures, or performance issues - nor any injuries, damage, death, or legal disputes - that may result from improper service from...
SKU number: DZ02 Motor type: Brushless DC The replaceable parts below can be purchased from Droyd, and will include instructions on Product type: Electric rideable product Motor voltage: 24 V how to replace the part(s).
***** Charge ONLY with the provided battery pack and charger, which are specifically provided for the Droyd Weeler (DZ02). • DO NOT use battery packs or chargers that are: from other brands; for other products/models;...
– is free from any defects in manufacturing, materials, and workmanship. Note that in the event of accidents, injuries, property damage, or death while using a Droyd product, This warranty gives you specific rights and you may also have other rights, which vary from state to insurance coverage is not guaranteed.
Customer support Have an issue? Please don’t return this product. Our friendly customer support staff can help. If your Droyd product should require service, contact customer support to: • Obtain information about replacement parts. • Ask any questions regarding the limited warranty.
Need help?
Do you have a question about the Weeler and is the answer not in the manual?
Questions and answers