Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Alphamount Manuals
  4. Racks & Stands
  5. APSF3
  6. Instruction manual

Alphamount APSF3 Instruction Manual

Full motion tv wall mount
Hide thumbs

Advertisement

Quick Links

Download this manual
Full Motion TV Wall Mount
Instruction Manual
Rev00(A)
Model: APSF3
Thank you for choosing this Alphamount product! At Alphamount we
strive to provide you with the best quality products and services in the
industry. Should you have any issues, please don't hesitate to contact at
support@alphamount.com.

Advertisement

loading
Need help?

Need help?

Do you have a question about the APSF3 and is the answer not in the manual?

Questions and answers

Related Manuals for Alphamount APSF3

Summary of Contents for Alphamount APSF3

  • Page 1 Instruction Manual Rev00(A) Model: APSF3 Thank you for choosing this Alphamount product! At Alphamount we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact at...

  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION • Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any questions or concerns, please contact our customer service at support@alphamount.com. CAUTION: Avoid potential personal injuries and property damage! •...
  • Page 3 Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact our customer service at support@alphamount.com. • Please note: Not all hardware included in this package will be used.
  • Page 4 Supplied Parts and Hardware for Step 2 Note: The washers and spacers are shown in accordance with the actual size. Washers Spacers [If needed] M4 / M5 M6 / M8 L2.5mm L10mm [B1] x 4 [B2] x 4 [F1] x 4 [F2] x 8 Note: The bolts are shown in accordance with the actual size.
  • Page 5 Note: The lag screw is shown in accordance with the actual size. Lag Screw ST 1/4 × 2-3/4'' CAUTION! This anchor is for Wall Anchor concrete or brick φ10mm walls ONLY. DO NOT use them in drywall or wood studs. Choose the Combination that Applies to Your VESA Hole Step 1 Pattern...
  • Page 6 Please Note: When using the spacers it is important to note that they can be used in multi-layers (meaning stacked). If you have any difficulty understanding how to install the TV bolts or spacers, please contact customer service at support@alphamount.com.
  • Page 7 CAUTION: Ensure the down-facing hooks are pointing to the bottom of the TV and the faceplate is EQUALLY CENTERED on the back of the TV. Please note: Please note: The bolt hole locations on your The bolt hole locations on your TV may vary in accordance of the TV may vary in accordance with the manufac- manufacturers design of the TV.
  • Page 8 Option D For cable interference or inset holes, use spacers [05] to create extre space between the TV and faceplate(or faceplate with extender brackets). F1 / F2 C2 / D2 / E2 B1 / B2 Alternate Spacer Setups When finishing securing the TV bolts into the TV, remember to tighten the bolts [G] using a Phillips screwdriver.
  • Page 9 3A-2 Position the arm assembly / wall plate [03] at your desired height and line up the holes with your stud center line. Level the and mark the wall plate holes. Arrow UP 2 3/4”(70mm) 3A-3 5/32 ”(4mm) Drill 2 pilot holes using a 5/32 ”(4mm) diameter drill bit.
  • Page 10 3B-1 Position arm assembly / wall plate [03] at your desired height. Level the wall plate and mark the pilot hole locations. Arrow UP 3”(75mm) 3B-2 3/8 ”(10mm) Drill 2 pilot holes using a 3/8 ”(10mm) diameter drill bit. Make sure the depth is not less than 3”(75mm).
  • Page 11 Step 4 Verify Wall Mount Installation by Putting Pressure on Wall Mount Before attaching the TV to the mount, please try to pull down the TV wall mount with your hands to check whether it is firmly secured. Step 5 Secure the TV onto the Arm Step 5-1 Remove the preassembled bolts [T] and washers [W] from the arm, and keep them for use in Step 5-3.

  • Page 12: Step 6 Tilt Adjustment

    Step 6 Tilt Adjustment Note: Please do not over-loosen the bolts to prevent the TV from Phillips Screwdriver falling down. (Not lncluded) 1. Loosen both tilt bolts [T] slightly. 2. Adjust TV to your desired tilt angle. 3. Retighten both tilt bolts [T] to fix the tilt angle. Step 7 Level Adjustment Note: Please do not-over-tighten or over-loosen the nut [L].