Table of Contents
Related Manuals for MPI MCWANE AWWA C509
Summary of Contents for MPI MCWANE AWWA C509
-
Page 1: Table Of Contents
RESILIENT SEATED GATE VALVE SIZES 2”-24” AWWA C509 & C515 INSTALLATION & OPERATION MANUAL TABLE OF CONTENTS PAGE Introduction Receiving & Storage Installation Operation Maintenance Stem Seal Procedure Troubleshooting Parts & Service Drawings 1201 Vanderbilt Road | Birmingham, AL 35234 866.924.8674 •... -
Page 2: Introduction
INTRODUCTION INSTALLATION WARNING: Installation of valves should be Resilient Seated Gate Valves (RSGV) were performed by experienced installers. Valves should introduced to the waterworks industry in the 1980’s never be used as structural supports and and became a dominant preference for use in movement into place. -
Page 3: Operation
STEM SEAL PROCEDURES pressure containing bolting (cover, follower plate, end connection) should be inspected for adequate tightness (usually 90 ft. lbs.). (CONT’D) NON-RISING STEM (NRS) VALVES 6. Buried valves should be pressurized Before beginning, contact McWane Plant & before backfilling. Industrial or an authorized distributor to obtain: 7. - Page 4 McWane Plant & Industrial or an authorized distributor to travel upward until the threads of the yoke nut to obtain packing (packing supplied by McWane Plant completely disengage the threads on the stem. & Industrial may come in one continuous coil or in segments).
-
Page 5: Troubleshooting
Parts and service are available from your local representative or the factory. For availability and 4. Remove and replace the wedge. pricing of spare parts please contact the MPI sales team: 5. Replace the cap sealing O-ring (not always necessary) – Retain the O-ring with lubricating grease McWane Plant &... -
Page 6: Drawings
OS&Y RSGV WITH FLANGED ENDS, SIZE 2” - 24”... - Page 7 NRS RSGV WITH MECHANICAL JOINTS, WITH HAND WHEEL SIZE 2” - 24”...
- Page 8 NRS RSGV WITH FLANGED ENDS SIZE 2”-24”...
- Page 9 NRS RSGV WITH MECHANICAL JOINTS AND SPUR GEARING SIZE 14”-24”...
- Page 10 NRS RSGV WITH MECHANICAL JOINTS AND BEVEL GEARING SIZE 14”-24”...
- Page 11 NRS RSGV WITH FLANGED ENDS AND SPUR GEARING SIZE 14”-24” H- No. & Size of Bolts Drilling per ANSI B16.1 Class 125...
- Page 12 NRS RSGV WITH FLANGED ENDS AND BEVEL GEARING 14”-24”...
- Page 13 OS&Y RSGV WITH FLANGED ENDS, AND BEVEL GEARING SIZE 14”-24”...
- Page 14 OS&Y RSGV WITH FLANGED ENDS, AND SPUR GEARING SIZE 14”-24”...
- Page 15 RSGV NRS FLANGED ENDS, WITH BEVEL GEAR SIZE 3”-12” F300/30 F300/30 F400/30 F600/30 F600/30...
- Page 16 KS-FW NRS MJ C509 WITH BEVELD GEAR SIZE 3”-12”...
- Page 17 NRS GATE VALVE MECHANICAL JOINT SIZES 2”-24”...
Need help?
Do you have a question about the MCWANE AWWA C509 and is the answer not in the manual?
Questions and answers