Aerpro APH05RKT User Manual page 15

(continued)
BACKGROUND MENU
VOX [VOX Option 2]
VOICE OPERATED TRANSMISSION
Voice Operated Transmission VOX allows you to transmit without needing to
press the [PTT] button. If you want to make use of this function, you should insert
the earpiece supplied with the transceiver.
1. With the radio turned OFF, press and hold [PF1] button and then turn on the
transceiver until you hear a "beep" sound, then release the [PF1] button to enter
into the background operation.
2. Press "UP ARROW" or "DOWN ARROW" button to choose No.2 function item.
It shows "VOX" on LCD.
3. Press "(FUNC) BUTTON" to enter into function menu setup.
4. Press "UP ARROW" or "DOWN ARROW" button to set desired VOX level.
5. Press "(FUNC) BUTTON" to go back to previous menu. Press "(ESC/M)
BUTTON" or "(#ENT) BUTTON" to confirm and exit.
VOX TIME DELAY [VOX DEY Option 3]
When using the VOX option , transmission stops and returns to receive mode
after you stop talking, an adjustable delay time can be programmed.
1. With the radio turned OFF, press and hold [PF1] button and then turn on the
transceiver until you hear a "beep" sound, then release the [PF1] button to enter
into the background operation.
2. Press "UP ARROW" or "DOWN ARROW" button to choose No.3 function item.
It shows "VOXDEY" on LCD.
3. Press "(FUNC) BUTTON" to enter into function menu setup.
4. Press "UP ARROW" or "DOWN ARROW" buttons to set desired delay. 0.5S-5S,
10 levels of delay time in total are available in level intervals of 0.5S.
5. Press "(FUNC) BUTTON" to go back to previous menu. Press "(ESC/M)
BUTTON" or "(#ENT) BUTTON" to confirm and exit.
VOX BEEP [VOXTON Option 4]
If enabled , the transceiver will beep when transmitting by VOX.
1. With the radio turned OFF, press and hold [PF1] button and then turn on the
transceiver until you hear a "beep" sound, then release the [PF1] button to enter
into the background operation.
2. Press "UP ARROW" or "DOWN ARROW" buttons to choose No.4 function item.
It will show "VOXTON" on LCD.
3. Press "(FUNC) BUTTON" to enter into function menu setup.
4. Press "UP ARROW" or "DOWN ARROW" button to set desired setup. ON: VOX
beep is enabled. OFF: VOX beep is disabled.
5. Press "(FUNC) BUTTON" to go back to previous menu. Press "(ESC/M)
BUTTON" or "(#ENT) BUTTON" to confirm and exit.
15