Related Manuals for MeiTrack MD600
Summary of Contents for MeiTrack MD600
- Page 1 MEITRACK_MD600 User Guide and Function Explanation MEITRACK MD600 User Guide and Function Explanation...
- Page 2 MEITRACK_MD600 User Guide and Function Explanation Documentation File name MEITRACK MD600 User guide Project MD600 Creation date 2023-09-20 Last updated 2023-09-20 Subproject User guide Total Pages Version V1.0 Privacy External Documentation Copyright © Meitrack Group 2023. All rights reserved. - 2 -...
-
Page 3: Table Of Contents
2 Step-by-Step Quick Installation and Use ............................- 4 - 2.1 Install The Device ................................- 4 - 2.2 Configure The Device ................................- 9 - 2.3 Login to The Platform ............................... - 12 - Copyright © Meitrack Group 2023. All rights reserved. - 3 -... -
Page 4: Copyright And Disclaimer
The user manual may be changed without notice. Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording. - Page 5 （2）Install the SIM card and SD card, and then lock the SD card lock back. (Note: After closing the card cover, you need to lock it with the key to ensure that the video function starts normally) （3）Unscrew the four screws on the upper part of the housing and open the top cover. Copyright © Meitrack Group 2023. All rights reserved. - 5 -...
- Page 6 MEITRACK_MD600 User Guide and Function Explanation Insert the hard disk into the slot and fix it with screws, then reassemble the housing. Copyright © Meitrack Group 2023. All rights reserved. - 6 -...
- Page 7 （4）Supply power to the device and connect the ACC (Note: During testing, the recording function will only be enabled when the ACC is connected to the positive terminal of the power supply and the SD card cover is closed.) Copyright © Meitrack Group 2023. All rights reserved. - 7 -...
-
Page 8: Configure The Device
There are three ways to configure: connect USB to a computer for software configuration, send text messages for configuration, or remotely configure after connecting to the platform. Below is the introduction to how to use the Meitrack Manager software for quick configuration. - Page 9 First of all, you must install the Meitrack Manager software (which can be downloaded from the official website www.meitrack.com). After installation, connect the type C data cable to the PC, you can configure it by following the steps below: （1）Configure the IP and PORT for data upload to the server: Use SMS text messages for setup: Configuration data upload the IP and PORT to send SMS command: 0000,A21,1,67.203.15.7,50005,APN( 如...
- Page 10 SD card automatically when it detects that the format is not correct. Make sure the SD card has been initialized, if it shows "No Error", it means the initialization is complete. Copyright © Meitrack Group 2023. All rights reserved. - 10 -...
-
Page 11: Login To The Platform
IMEI must be the same as that of the device itself. The IMEI here must be consistent with that of the device itself, otherwise, the platform cannot recognize it. Modify the expiration time, and click "Submit", and the corresponding number of years will be consumed: Copyright © Meitrack Group 2023. All rights reserved. - 11 -... - Page 12 If the "signal icon" with a green grid appears, it means that the device is successfully online: Monitoring： Click the live stream chart or right-click the device and click "Video Monitor" for full channel monitoring. Copyright © Meitrack Group 2023. All rights reserved. - 12 -...
- Page 13 MEITRACK_MD600 User Guide and Function Explanation If you are clicking on a single channel camera, such as CH1 Copyright © Meitrack Group 2023. All rights reserved. - 13 -...
- Page 14 Video playback retrieval: Click the playback icon or right click "Video playback", select the corresponding camera channel, select the corresponding time period, then you can play back the video. Copyright © Meitrack Group 2023. All rights reserved. - 14 -...
- Page 15 MEITRACK_MD600 User Guide and Function Explanation Copyright © Meitrack Group 2023. All rights reserved. - 15 -...
- Page 16 FTP server. Historical positioning data query: Right-click on the device and click on "Historical data", click on the "Map" button, then you can view the movement track. Copyright © Meitrack Group 2023. All rights reserved. - 16 -...
- Page 17 MEITRACK_MD600 User Guide and Function Explanation If you have any questions, please do not hesitate to email us at info@meitrack.com. Copyright © Meitrack Group 2023. All rights reserved. - 17 -...
Need help?
Do you have a question about the MD600 and is the answer not in the manual?
Questions and answers