Summary of Contents for Aithre Shield eDot 5.0
- Page 1 Aithre Shield eDot 5.0, Part No. AS-5 Carbon Monoxide Detector INSTALLATION, USER INSTRUCTIONS, AND MAINTENANCE MANUAL AITHRE SHIELD EDOT 5.0 INSTALLATION MANUAL Document 001-022, Revision 01 Dated July 6, 2022...
-
Page 2: Table Of Contents
MOUNTING DIAGRAMS ........................4 MOUNTING INSTRUCTIONS ........................5 CONFIGURATION AND SETUP ........................ 5 USER OPERATION INSTRUCTIONS ......................6 MAINTENANCE ............................. 8 OPERATING LIMITATIONS ........................9 AITHRE SUPPORT ..........................10 AITHRE SHIELD EDOT 5.0 INSTALLATION MANUAL Document 001-022, Revision 01 Dated July 6, 2022... -
Page 3: Introduction
INTRODUCTION GENERAL INFORMATION FAA approved for Certified Aircraft but also available for experimental Aircraft builders: The Aithre Shield eDot 5.0 is the first behind-the-panel device that puts carbon monoxide indications to a panel mounted LED light and to your iOS device. Features a simple power/ground wiring installation, a small lightweight footprint, and 10 years without recalibration for the CO ppm. -
Page 4: Mounting Diagrams
MOUNTING DIAGRAMS o Housing Dimensions o LED Indicator Dimensions AITHRE SHIELD EDOT 5.0 INSTALLATION MANUAL Document 001-022, Revision 01 Dated July 6, 2022... -
Page 5: Mounting Instructions
The wireless data can be accessed by another device capable of receiving wireless data • The Aithre Connect app on iOS may be used to confirm wireless data is received. Download the Aithre Connect iOS app from the Apple store on an iPhone or §... -
Page 6: User Operation Instructions
ATC of the issue. • If the CO detector has failed, return the unit to Aithre Inc., 1104 SW Matrix Loop, Suite 110, Port Orchard, WA 98367 AITHRE SHIELD EDOT 5.0 INSTALLATION MANUAL... - Page 7 Incense smoke produces excess of 255 ppm and the device should respond within 1 minute. à The LED should be labeled as INOP if test fails until corrected. AITHRE SHIELD EDOT 5.0 INSTALLATION MANUAL Document 001-022, Revision 01 Dated July 6, 2022...
-
Page 8: Maintenance
Never try to dismantle or open the product yourself, or push objects of any kind into the product. o The Aithre Shield eDot 5.0 CO detector levels are calibrated at the factory during manufacturing. No recalibration is required for 10 years under normal operating conditions. -
Page 9: Operating Limitations
OPERATING LIMITATIONS o The Aithre Shield eDot 5.0 is not a required system and may not be used as a substitute for any required or essential certified aircraft system. o The lifespan of the Aithre Shield eDot 5.0 is 10 years from the date of calibration as indicated on the warranty card. -
Page 10: Aithre Support
AITHRE SUPPORT Support for Aithre products is available on our website www.aithreaviation.com, phone 208-481-8310, and email support@aithreaviation.com Location Aithre Inc. Port Orchard Airport (4WA9) 1104 SW Matrix Loop, Suite 110 Port Orchard, WA 98367 Mailing Aithre Inc. PO Box 1029...
Need help?
Do you have a question about the Shield eDot 5.0 and is the answer not in the manual?
Questions and answers