Summary of Contents for MCAudioLab OC1
- Page 1 COMPRESSOR USER GUIDE for the 500 Series enclosures - 1 - MCAudioLab OC1 Compressor module - user manual issue 1.0...
- Page 2 The tradi�onal gain reduc�on meter has been replaced with a more intui�ve LED Compression Rate meter. Doesn’t ma�eri f your track is about classic or hard-rock genre, the OC1 fits well on every sound. Now you have the ability to create an en�re classic channel all within a 500 series rack with the addi�on of the MCAudioLab MP1 preamp and the SE1 equalizer.
- Page 3 VCAs. This is an advantage as longer reac�on �mes result in a so�er and smoother sound. Specifically, the OC1 manages to give a so� and effec�ve compres- sion and its effect is almost impercep�ble. The audio signal passes through a discrete OpAmp (the MCAudioLab’s 816) which is the heart of the OC1.
- Page 4 Switch off the 500-series enclosure and remove mains power. Carefully insert the OC1 module into the empty slot in the 500-series enclosure and ensure the rear edge connector on module and the edge connector of the 500-series enclosure mates correctly.
Need help?
Do you have a question about the OC1 and is the answer not in the manual?
Questions and answers