Table of Contents
Advertisement
USE WITH GS SCANNERS
Bluetooth SPP Mode
The Bluetooth SPP mode is a Bluetooth serial port. You need a
Bluetooth serial port software for data transmission. The SPP
mode can also use the serial port software to send commands to
the scanner. We provide Generalscan Keyboard Pro App to help
you convert serial data into keyboard data, which can output
data at the cursor, or you can use it to send commands.
Step 1. Please scan Bluetooth SPP Mode barcode.
Bluetooth SPP Mode
The blue LED of your scanner is slow blinking. This means that
the device is in pairing mode (SPP mode).
Step 2. Please open the application and ' Turn on Bluetooth' then
please change the keyboard with Generalscan Keyboard.
Step 3. Please click to 'Connect Scanner' .
Step 4. Please click to 'Bluetooth Scanner' .
Step 5. Please click to 'Go select' .
Step 6. Choose your 'Barcode Scanner' .
Step 7. Enter PIN '1234' and click next step.
Step 8. You will able to see your data
in your device.
Keyboard Pro
´1234´
Advertisement
Table of Contents
