Download Print this page

ML Accessories LEDM09WW Installation & Maintenance Manual

Advertisement

Quick Links

GENERAL
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole
luminaire should be replaced.
Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not
use aggressive cleaning products or solvents which may damage the product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
A light film of acid-free oil is recommended after installation and maintained periodically (2-3 times a year) to
aid corrosion prevention.
This product is non-dimmable.
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist.
WARRANTY
This product has a warranty of 3 years from date of purchase. Failure to install this product in accordance with
the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will
invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place
of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve
the right to alter product specification without prior notice.
LEDM09xx INSTRUCTION MANUAL.indd 1-3
LEDM09xx INSTRUCTION MANUAL.indd 1-3
SUPPLIED BY:
(UK) MANUFACTURER
ML ACCESSORIES LTD, UNIT E CHILTERN PARK,
BOSCOMBE ROAD, DUNSTABLE LU5 4LT,
WWW.MLACCESSORIES.CO.UK
(EU) AUTHORISED REPRESENTATIVE
SLV LIGHTING GROUP,
DAIMLERSTRASSE 21-23,
52531 ÜBACH-PALENBERG, GERMANY
EMAIL: EPREL@GROUP.SLV.COM
MADE IN CHINA
-25~
>80
°C
40
CRI*
TA
02
HWOCT23_V1
INSTALLATION & MAINTENANCE MANUAL
LEDM09WW / LEDM09CW
23/10/2023 17:29:09
23/10/2023 17:29:09

Advertisement

loading
Need help?

Need help?

Do you have a question about the LEDM09WW and is the answer not in the manual?

Questions and answers

Summary of Contents for ML Accessories LEDM09WW

  • Page 1 IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation LEDM09WW / LEDM09CW costs associated with the replacement product.
  • Page 2 75mm These instructions should be used to aid installation of the following products: Fig. 1 LEDM09WW / LEDM09CW We recommend not installing in areas where there is a high risk of flooding or areas where water may • Fig. 1 sit on top of the fitting (see Fig.

This manual is also suitable for:

Ledm09cw