Lamp AZ-GD230-HL Installation Instructions

Installation instructions
AZ-GD230-HL
MULTI-PURPOSE LID (W/DAMPER)
Thank you for selecting our product. Before starting installation, please read this
manual thoroughly to ensure correct installation. Please keep this manual at hand
for future reference.

ABOUT THE PRODUCT

Damper allows silent closing of lid.
Side plates for anti-pinch function.

FOR YOUR SAFE WORK AND CORRECT INSTALLATION

Meaning of symbols
Warning
Caution
Caution
If not followed injury or damage may result.
This product is designed to function when installed vertically as shown below. Horizontal, slanted or upside down installation
will result in improper function and may lead to injury.
To prevent the risk of the product falling and causing injury, ensure that the AZ-GD230-HL is securely fastened to a structure
with adequate strength.
Do not disassemble nor modify any parts other than those described in this document.
Recommended ambient temperature range is 0 to 40 degrees centigrade.
The closing speed of the lid may vary according to ambient temperature .If the product is stored below zero degrees, please
store in room temperature for several hours before use.

PARTS DESCRIPTION

Description
Flap lid body
Warning sticker
Cover cap

DIMENSION DRAWING

(184.7)
when flap at 90
(22.6)
4 3.5 holes
when flap at 90
for installation
screws
10
(1.5)
100
Prohibited Required
Quantity
308
234
SUGATSUNE
SUS304

TOOLS NEEDED FOR INSTALLATION

Screws (not provided)
Choose the suitable length according to the material to be
mounted.
Recommended screw : 3mm tapping screw

CUTOUT DIMENSIONS

Cutout : front view
147.5
Cutout : side view
132.5
AZ-GD230
Mounting screw holes
+1
265
0
4 pcs
18 22mm