Table of Contents
Advertisement
m§tgJhe'MmeM
C
CD
Press ◄ or ► to select the
desired preset channel.
cm
QQ in
jus*
I a
DU iu« * «\*
mw.ii cornua.
nucT
Press SET.
6
Prepare for recording.
1. Insert a cassette into deck 2.
2. Select the Dolby NR.
3. Select the reverse mode.
4. Select the tape travel direction.
7
POWER
STANOBSJON
Press POWER on the amplifier
to switch the power to standby
mode.
Please confirm 0 REC appears on the
display.
EREC
To cancel the timer:
Press 0 REC to go out 0 REC on the
display.
The record timer will not function, but the record timer setting will stay
in the memory.
If you make an error:
Follow the procedure from the first step.
About the variation of the day setting:
One day from Sunday to Saturday:
SUN.. .SAT
Everyday from Sunday to Saturday: SUN-SAT
CLOCK/
TIMER
To confirm the record timer:
Press CLOCK/TIMER to show 0 REC on
the display.
1
T
1
Q c r
u i r r /_
**r#
The display will show the ON tfme, OFF
time, the broadcast band you select, in
2 seconds steps.
To change the record timer setting:
Press CLOCK/TIMER to return to step 1.
Using the timer at the same time setting continu¬
ously:
1. Press 0 REC to show 0 REC on the display.
2. Press POWER to switch the power to standby mode.
To enjoy the desired source after the timer setting
is completed:
1. Start playing the desired source.
When listening to a cassette tape, use the deck 1.
Even if you change the music source, the timer recording will start
with the preset condition.
2. After enjoying the source, prepare for recording, and then press
POWER to standby mode.
Notes
•When the record timer is functioning, you cannot confirm the record
timer.
•This system retains the ON/OFF time settings until you make a new
setting. In case you make a new ON time setting which is later than
the previous OFF time setting, the system automatically advances
the day you set on the step 3. When you reset the OFF time, the day
setting will return to the original setting.
•You cannot make the ON time and OFF time same setting.
• If the power is on, the timer will not function.
•Once the record timer operation finishes, it clears the record timer
mode (except for "everyday from Sunday to Saturday" mode).
•When you want to record a same program over several weeks,
(except when you select "everyday from Sunday to Saturday"
mode), press 0 REC to show 0 REC on the display after the timer
recording has finished.
For your reference:
While timer recording is taking place, the volume level will be auto¬
matically muted.
45
Advertisement
Table of Contents
