Subscribe to Our Youtube Channel
Related Manuals for Binatone Simplq better WTD-2020
Summary of Contents for Binatone Simplq better WTD-2020
- Page 1 ENGLISH WATER DISPENSER To get the best results from your Binatone product please read these instructions carefully. WTD-2020...
- Page 2 & value products available in the market today. Our commitment lies solely in delivering high quality, affordable products. Our international team is constantly pursuing every effort to make products not just ‘appliances’ but ‘lifestyle improvements’. Check out all the latest Binatone products at: www.binatonelifestyle.com...
-
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances – especially when children are present, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons. ✓ READ ALL INSTRUCTIONS ✓ Make sure your power supply is consistent with the rated specification of the product before connecting. -
Page 4: Know Your Appliance
Circuit diagram KNOW YOUR APPLIANCE 1) Upper Cover 2) Indicator Lights (*) 3) Cold water tap (blue) 4) Ambient water tap (white) 5) Hot water tap (red) 6) Drip tank & cover 7) 12L Fridge compartment 8) Heater On/off switch 9) Cooler On/off switch 10) Power cord &... -
Page 5: Setup Instructions
BEFORE FIRST USE Carefully remove all packaging and assemble the product following the setup & operating instructions below. The appliance should be used on a solid, level surface. It can be used free standing with care, ensuring at least 10cm clearance between the rear of the appliance and any surrounding objects. - Page 6 SETUP INSTRUCTIONS continued 1) Secure the S bracket (3) to the rear of the water dispenser (1), using the supplied screws (4). There is one S bracket (3) for each side of the water dispenser (1). 2) Fit the S bracket (3), so that the end of the bracket near the wall, is to the left & right of the water dispenser (1) and is slightly wider than the water dispenser (1) housing.
-
Page 7: Care And Cleaning
OPERATING INSTRUCTIONS continued Ambient temperature water To dispense ambient temperature water, open the white tap (4). It can be used with/without the power cord & plug connected (or during power outage) 4. Fridge Compartment The fridge compartment (7) has a capacity of 12L and is ideal to cool canned/bottled beverages. - Page 8 CARE AND CLEANING continued Water System Flush Periodically, flush the water system with purified water – do NOT use any detergents, cleaners or solvents. Unplug the power cord & plug (10), empty the fridge compartment (7) & remove any water bottle.
-
Page 9: Troubleshooting Guide
(water bottle has water) hours to come to ambient temperature. Check flow & if OK, switch on cooler (9) If no flow - Contact your nearest Binatone service centre No water flow from the hot water tap (5) Thermal protector on heater has operated... -
Page 10: Service & Customer Care
SERVICE & CUSTOMER CARE There are no user serviceable parts inside this appliance. If the power cord or plug are damaged it must, for safety reasons, be replaced by Binatone or an authorised Binatone repairer. If you need help with: •...
Need help?
Do you have a question about the Simplq better WTD-2020 and is the answer not in the manual?
Questions and answers