ASV BRC570 Installation

Installation / Fitment Guide
BRC570 or BRF370
This lever was designed to fit Nissin radial brake master cylinders
installed on the following motorcycles.
BMW
S1000R (w/non-adjustable OEM lever)
S1000RR (w/non-adjustable OEM lever)
S1000RR (w/adjustable OEM lever)
M1000RR
M1000R / RR

TOOLS

•
10mm wrench
•
Flathead screwdriver
•
Small Philips screwdriver
Install at your own risk! ASV Inventions INC. accepts no liability
for failures or malfunctions due to improper installation.
Need help? Contact ASV!
Our techs are available Monday through Friday, 9am to 5pm PST
714.861.1400
Phone: Email:
YEAR KAWASAKI
14-21 Ninja 1000SX
09-19 Ninja H2 SX
18-24 Ninja H2 SX SE+
21-22 Versys 1000 SE / SE LT+
23-24 Z H2
info@asvinventions.com

0: ASSEMBLE THE ASV LEVER

If this lever was ordered directly from ASV Inventions, the lever will have
come pre-assembled with the proper adapters to fit your application.
Otherwise, follow the next step to assemble your lever.
Install the NEUTRAL SWITCH tab using the small Philips screwdriver
For BMW, use tab BR70-T1
For KAWASAKI, use tab BR70-T2
YEAR
20-24
2018
19-21
19-21
20-24

1: REMOVE THE OEM BRAKE LEVER

1a) Locate the 10mm locknut on the bottom side of the master
cylinder, use the 10mm wrench to unscrew. Once released, use a
flathead screwdriver to remove the pivot bolt.
1b) Remove the lever. If the plunger rod comes out, place it back into
the master cylinder.