Advertisement
• Anticlockwise the switch of battery cover 45°, open it and remove battery.
• Insert the SD card into the slot.
• Place the battery in the correct direction in the battery slot, and then close the battery cover
by turning the battery cover switch clockwise 45° to lock the battery cover.
SIM 2 Card Slot
SIM 1 Card Slot
• Using USB Data Cable
Connect the IP smart terminal and power adapter using the USB Data Cable.
Red light on the IP smart terminal indicates battery charging in progress.
Green light indicates fully charged.
Important:
• Use only the designated charger.
• Battery must be fully charged before first use.
• Do not expose the battery to high temperature.
• Do not dismantle the battery.
Installation of SIM card
Charging the Battery
DELTA RADIO GROUP
www.deltaradiogroup.com
Battery Compartment
Groove
SD Card Slot
Battery Release Groove
Advertisement
