Table of Contents
Advertisement
A
Intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
A
Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the
literature accompanying Lhe product.
CAUTION: Risk of electrical shock - DO NOT OPEN!
CAUTION: To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel.
WARNING: To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this
appliance, read the operating guide for further warnings.
WARNING: For optimum performance and reliability DO NOT PRF.SI:NT EACH (either of the two)
A
AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 4 OHMS. OR A COMBINATION OF SPEAKERS
THAT TOGETHER ARE LESS THAN 4 OHMS!
Using one speaker, it must be rated at 4 ohms minimum.
Using two speakers, they must be rated each at 8 ohms minimum.
Thank you for purchasing the Peavey XRD 680S mixer with built-in stereo digital effects
and stereo amplifiers. This is a powerful, easy-to-use. portable, eight-channel mixing con¬
sole.
Your XRD'' 680S features a rugged, heavy-gauge cold-rolled steel and aluminum chassis,
finished in oven-cured epoxy for toughness and screen-printed utilizing the latest photo¬
graphic film and U.V.-eured ink technology for razor-sharp, hard-wearing control I.D. and
calibration graphics.
Every on-board component has been carefully chosen to deliver the highest possible perfor¬
mance. Precision, professional reliability, and minimal operating noise characteristics are
only the initial criteria used during the process of selecting the components that ensure that
your XRD " 680S becomes an indispensable addition to your live performance equipment.
All printed circuit boards are constructed from rugged. U.S. military-spec material using the
latest automated assembly technology, wave solder, and computer-controlled "all-faults-
analyzed-and-corrected" Q.A. procedures.
Each channel features front-panel output and monitor level controls, as well as high. mid.
low equalization and effects emphasis controls. Every input channel has a studio-quality,
low-impedance (XLR-type input) microphone input, as well as a 1/4" line input. Switchable
+48 V phantom power is provided.
The unit features stereo 150-watt power amplifiers.
Advertisement
Table of Contents
