DCS clim8 Instruction Manual page 7

Intelligent thermal technology inside
Table of Contents

Advertisement

Available languages

Available languages

CAREFULLY FOLLOW THESE
INSTRUCTIONS.
WARNING:
USE ONLY RECHARGEABLE
BATTERIES, OTHER TYPES MAY
EXPLODE.
To reduce the risk of fire or
electric shock, do not expose
charger to rain or moisture.
CAUTION:
Read all instructions and
warnings prior to using this
charger. Improper use of this
product may result in product
damage, excess heat, toxic
fumes, fire or explosion. See
instructions for input voltage
conversion.
IMPORTANT SAFETY
INSTRUCTIONS - SAVE THESE
INSTRUCTIONS. Risk of injury.
Risk of fire/Risk of electric shock.
Refer to this instruction manual
for the size, type, and number of
batteries to be charged.
Dry location use only.
Charge only 7.4V Li-Ion rechar-
geable batteries with this charger.
Children should be supervised to
ensure that they do not play with
the charger.
Do not use near water.
Clean only with dry cloth. Always
remove the charger from the
socket before cleaning.
12
Do not install charger near any
heat sources such as radiators,
heat registers, stoves, or any other
product (including amplifiers) that
produces heat.
Damaged chargers or charging
cables cannot be repaired.
Dispose of the charger in accor-
dance with local regulations at a
collection site for electronic waste.
The charger must only be used in
the following conditions:
Ambient operation temperature:
32°F to 104°F; 0°C to 40°C.
Storage environment:
Temperature: 14°F to 122°F; -10°C
to 50°C. Humidity: 5-95% RH (do
not have condensate).
This charger is not intended for use
by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety.
If the shape of the plug does not
fit the power outlet, use an attach-
ment plug adapter of the proper
configuration for the power outlet.
Class 2 Battery Charger. Backfeed
Protection.
This symbol means this
charger is for indoor use
only.
This symbol means that
this charger has reinforced
insulation with no
accessible metal parts. Class 2
equipment plugs do not have a
grounding prong.
MODEL
CH0161-0842000G
100-240VAC,
INPUT
50/60Hz, 0,5A
OUTPUT VOLTAGE
8.4V
(VDC)
OUTPUT CURRENT
2000mA
(MA)
OUTPUT WATTAGE
16,8W
(MAX-W)
This charger complies with part
15 of the FCC Rules. Operation
is subject to the following two
conditions:
1 This device may not cause
harmful interference, and
2 This device must accept any
interference received, including
interference that may cause
undesired operation.
NOTE: This equipment has been
tested and found to comply with
the limits for a Class B digital device,
pursuant to part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference in
a residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interfe-
rence to radio communica-
tions. However, there is no
guarantee that interference
will not occur in a particular
installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into
an outlet on a circuit different
from that to which the receiver is
connected.
Consult the dealer or an
experienced radio/TV technician
for help.
TRANSMITTER
INSIDE
TRANSMITTER
Bluetooth
TYPE
FREQUENCY
2400-2483.5 MHz
RANGE
TYPE OF
GFSK
MODULATION
MAXIMUM RADIO-
FREQUENCY
<10dBm
POWER
TRANSMITTED
EN
FR
IT
DE
13

Advertisement

Table of Contents
loading

Table of Contents