Advertisement
CARTON CONTENTS
SHELF SIGN CHANNEL, 1-1/4" (BLACK)
ITEM #
1A
1-1/4" SHELF SIGN CHANNEL (BLACK)
SHELF SIGN CHANNEL, 1-1/4" (SILVER)
ITEM #
1A
1-1/4" SHELF SIGN CHANNEL (SILVER)
CARTON DIMENSIONS: 16-3/4" X 12" X 9-1/2" (BULK PACK OF 300)
CARTON WEIGHT: 22-1/2 LBS. (BULK PACK OF 300)
UNIT WEIGHT: LESS THAN 1 LBS. (EACH)
NOTE - FOR LARGER QUANTITIES,
SHELF SIGN CHANNELS ARE
BULK PACKED (300)
PER CARTON.
300092-IS
4/29/2013
SHELF SIGN CHANNEL, 1-1/4"
DESCRIPTION
DESCRIPTION
1A
NOTE -
Installation IS THE SAME
FOR ALL COLORS OF
SHELF SIGN CHANNELS
INTRODUCTION:
CAREFULLY READ THE CONTENTS OF THESE
INSTRUCTIONS, AS THEY INDICATE THE CORRECT
STEP BY STEP PROCEDURE TO ASSEMBLE THE
PRODUCT. THE CARTON CONTENTS PAGE(S) WILL
QTY
IDENTIFY THE ASSEMBLY PARTS. BEFORE
PROCEEDING WITH THE ASSEMBLY PROCESS, MATCH
1
THE CARTON CONTENTS TO THE STATED CONTENTS
TO ENSURE THERE ARE NO MISSING PARTS. IN THE
EVENT OF ASSEMBLY PROBLEMS OR MISSING PARTS,
QTY
PLEASE CONTACT OUR CUSTOMER SERVICE
1
DEPARTMENT.
PHONE:
WEBSITE: WWW.TOBACCOFIXTURES.COM
CAUTION:
ASSEMBLED TOBACCO FIXTURES MAY BE VERY
HEAVY. DO NOT ATTEMPT TO LIFT OR MOVE
WITHOUT ASSISTANCE.
THE MANUFACTURER OF THIS DISPLAY
ASSUMES NO LIABILITY FOR INJURY CAUSED
BY IMPROPER ASSEMBLY/INSTALLATION OF
THIS DISPLAY.
NUMBER OF PEOPLE REQUIRED TO ASSEMBLE UNIT:
(1)
ASSEMBLY TOOLS REQUIRED:
NONE
PAGE 1 OF 2
1-800-968-6991
Advertisement
Table of Contents
Summary of Contents for Harbor Industries Flex Frame 2
- Page 1 SHELF SIGN CHANNEL, 1-1/4" INTRODUCTION: CAREFULLY READ THE CONTENTS OF THESE CARTON CONTENTS INSTRUCTIONS, AS THEY INDICATE THE CORRECT STEP BY STEP PROCEDURE TO ASSEMBLE THE SHELF SIGN CHANNEL, 1-1/4" (BLACK) PRODUCT. THE CARTON CONTENTS PAGE(S) WILL ITEM # DESCRIPTION IDENTIFY THE ASSEMBLY PARTS.
- Page 2 SHELF SIGN CHANNEL, 1-1/4" INSTALLATION INSTRUCTIONS TOBACCO FIXTURE SHELF BELOW THE SHELF ORIENTATION VIEW 3 VIEW 1 SIGN CHANNEL ABOVE THE SHELF INSTALLATION ORIENTATION STEP 1 - DETERMINE THE ORIENTATION OF THE SIGN CHANNEL ON THE TOBACCO FIXTURE SHELVES, BELOW THE SHELF (VIEW 1) OR ABOVE THE SHELF (VIEW 2). STEP 2 - CAREFULLY PRESS A SIGN CHANNEL ONTO THE FRONT LIP OF THE FIRST SHELF SO THAT IT IS FULLY SEATED (VIEW 3).
Need help?
Do you have a question about the Flex Frame 2 and is the answer not in the manual?
Questions and answers