Cd Synchronized Recording - Yamaha KX-M5 Owner's Manual

OPERATIONS

CD synchronized recording

When you connect the unit to the CRX-M5, you can
easily record a CD on a tape.
You can use a TYPE I (normal) or TYPE II (CrO
for recording.
DOLBY NR
STANDBY/ON
DOLBY REC REC/
NR MODE MUTE PAUSE
STANDBY/ON
POWER TIMER CLOCK
/
TUNING
TIME REP EDIT
FM/AM ST/MONO DISC
1 2
MEMORY PRESET
PGM
TUNER CD
1 2 3 4
6 7 8 9
REC/ REC/ CD
PAUSE MUTE SYNC
/
TAPE
MD
INPUT SLEEP MUTE VOLUME
–
1
Press STANDBY/ON to turn on the unit .
2
Press ) to open the tape tray and place a blank
tape on the tray.
3 Press ) to close the tape tray.
4
Press DOLBY NR to set the DOLBY NR function to
ON (DOLBY NR indicator lights up) or OFF
(DOLBY NR indicator goes out).
OFF: For recording with DOLBY NR OFF.
ON: For recording with DOLBY NR ON.
E-10
) tape
2
)
MODE
SET
3
41/¡¢
/
7 (TUNER CD)
5
0
+10
CD SYNC
7 (TAPE)
+
INPUT
5
Press MODE to select the reverse mode.
Each time you press MODE, the reverse mode
changes and corresponding MODE indicator lights
up as follows:
: One side of the tape is recorded.
, : Both sides of the tape are recorded.
6
Set the desired CD in the CRX-M5 and press
INPUT to select CD.
7
Press CD SYNC.
8
Press 41/¡¢ so that "CD
appears in the display of the CRX-M5.
9
Press CD SYNC.
The unit starts CD play from the beginning of the
disc and the unit starts recording automatically.
You can record a CD in various modes. For details,
refer the instructions of the CRX-M5.
To stop CD synchronized recording
Press 7 (TUNER CD) or 7 (TAPE).
Notes
• You can edit the tracks on a CD to be recorded so that they
will fit onto the tape with the least amount of unrecorded
space remaining at the end of each side of the tape using
Automatic editing function of the CRX-M5.
• When the tape becomes full in the middle of the recording,
each unit stops.
• Adjusting the VOLUME control of the CRX-M5 has no effect
on the recorded sound.
TAPE"