1. WELCOME Dear Customer, Thank you for purchasing this QUADRANT smartwatch. Please read the instructions provided in this Safety Guide to get the most out of this product. 2. SAFETY PRECAUTIONS When using this device, always follow the basic safety precautions listed below to reduce the risk of accidents, electric shock, injury and fire.
mobile phone radio signal. 5. Never disassemble the device yourself. 6. Charge in a well-ventilated area and keep away from flammable and highly explosive sources. 7. To avoid demagnetisation, keep the device away from hard disks, credit cards and other objects that work with magnetic fields.
Page 4
2.2 MEDICAL UNIT The use of equipment transmitting radio waves, e.g. mobile phones, may interfere with inadequately protected medical equipment. Consult a doctor or the manufacturer of the medical device to determine if it has adequate protection against external radio signals. If there are signs prohibiting the use of mobile phones, you are required to obey them.
Page 5
Observe the limits that apply to the use of radio equipment near places where fuel, chemicals, or explosives are stored. Explosion risk areas are often, but not always, clearly identified. This also applies to low roofs (on ships), transport or storage of chemicals, vehicles using liquid fuel, areas where the air contains chemicals or metallic particles (such as grain or dust).
2.6 WARNINGS ON THE USE OF THE STRAP - This device is not a toy. In particular, it must not be placed in the mouth, especially by children, to avoid swallowing and/or suffocation. - When worn, the device should not be tightened excessively to allow air circulation and should be removed from time to time.
Before downloading, check the compatibility of the operating systems and Bluetooth protocol. To download the SIMPLO App go to simplo01.com/gima.html and you will be redirected to Google Play or App Store. Follow the instructions in the user guide included in the package.
Directive 2014/53/EU. The full text of the Declaration of Conformity is available at simplo01.com/gima.html. 7. DISPOSAL OF THE DEVICE At the end of the product's lifespan, do not throw this...
can be reused if handed over to a collection point. By reusing some of the parts or materials in your products you make an important contribution to protecting the environment. Contact your local authorities to make sure of any collection points in your area. In any case, remove the battery before disposing of the device.
The manufacturer declares that the use of this device does not involve sending data to third parties. The used or collected data is all anonymous and is stored exclusi- vely on the smartwatch and Smartphone, unless otherwise knowingly authorised by the owner via the app.
Page 11
10.1 CHARGING AND ACTIVATING THE WATCH Before using the watch for the first time, it must be charged and activated. Use the magnetic charging cable provided. Connect the end with the two magnets to the watch magnets and the other end of the charging cable with the USB plug to the USB connection of your computer.
7. Select your watch by clicking on the respective code (the code can be found on QUADRANT by activating the screen and dragging from top to bottom. On the next screen, you will find the "i" icon. Click on it and the device code will appear.
Page 13
10.4 CALORIES/BPM/STEPS To view calories burned, heart rate per minute and steps taken, swipe your finger from right to left on the watch's touch screen. 10.5 BODY TEMPERATURE INTERFACE To take a temperature measurement, make sure the watch is placed securely on your wrist and the sensors are in skin contact.
10.6 HEART RATE MONITORING To measure your heart rate, make sure the watch is placed securely on your wrist and the sensors are in skin contact. Swipe your finger from right to left three times to switch from the main screen to the heart rate measurement screen.
Once on the screen, measurement will start automati- cally. If measurement is started from the watch, measurement will be continuous. To take a timed measurement, start the ECG from the APP and wait for the progress bar to reach 100%. When the APP measurement is complete, a report of the analysis will appear.
Page 16
10.9 BLOOD OXYGEN INTERFACE To perform blood oxygen measure- ment, make sure the watch is securely placed on your wrist and the sensors are in skin contact. Swipe your finger from right to left six times to move from the main screen to the blood oxygen measurement screen.
11. OTHER FUNCTIONS 11.1 SPORT MODE To display the sports mode interface, swipe your finger from right to left eight times to switch from the main screen to the sports mode interface. There are several sports modes to choose from. Click the exercise icon to access the corresponding exercise.
11.3 SLEEP MONITORING When you fall asleep, the watch automatically detects that you are in sleep mode and automatically detects how long you have been asleep and the quality of your sleep: light sleep/deep sleep. Note: To detect this data you need to wear the watch before falling asleep and keep the watch on all night.
11.5 PHOTOS Once the app is launched, you can take a photo from a distance, using the "camera" icon to take a photo. 11.6 SHORTCUT FUNCTIONS Scroll down from main interface to enter the shortcut function interface, select "Do Disturb", "About"...
Page 20
11.6.2 INFORMATION Click on the message to display the message content, scroll up and down to change message. Scroll right to exit. 11.6.3 WRIST LIFT Touch the wrist lift icon to automatically turn on the screen when you lift your wrist. 11.6.4 BRIGHTNESS Click the brightness icon to freely select the screen brightness.
Page 21
PRECAUTIONS 1. Do not use an adapter with a current of more than 2A. Charging time is about 2~3 hours. 2. Do not recharge if the device has been damaged by water. 3. Tips for measuring blood pressure: a) Maintain your body relaxed and quiet during the test.
Need help?
Do you have a question about the QUADRANT and is the answer not in the manual?
Questions and answers