Advertisement
Available languages
Available languages
Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau GmbH will
carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating them
with a wood protection agent, the delivery and assembly of accessories and accessory parts. Electrical connections
are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article or the
individual parts over a distance greater than 5 m or to another level is not included in the assembly price quoted.
The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 'Level tolerances in building construction', tab. 3,
row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations before assembly
begins. The substrates/floors/foundations constructed or selected by you must be suitable for the assembly.
Name and address of the manufacturer
Manufacturer:
weka Holzbau GmbH
Johannestr. 16
D-17034 Neubrandenburg
Tel.
Fax
E-mail info@weka-Holzbau.com
Transport and storage
The product is delivered stacked on pallets.
After unpacking and checking, handle the parts as follows:
Protect the wood against
long-term, direct sunlight
Incorrect storage may result in:
Technische. Änderungen vorbehalten!
: (0049)-395 429080
: (0049)-395 4290883
moisture
- Cracks
- Distortion and warping
-
Rotting (infestation by pests etc.)
contact with the ground
Store the wood such that it is protected against weathering and
has sufficient ventilation.
5
Copyright HRB3662
Advertisement
