Advertisement
Step.5 Insert display key & LED board & stand power connectors and assemble
the rear cover.
Step.6 Push into hooks between MID_FRAME and R/C and lock 2 screws.
Step. 7 Press release button then insert the Stand Riser. Insert the Stand Base
then lock one screws. (Advised tools: By hand or screw-driver.)
By Screw driver
By hand or
By Screw driver
11
Screw: M4x10
Force: Force:5-7 kgf.cm
Stand Base Screw: M5 x 25
Screws are on Stand
Riser/Base and can not be
removed.
Advertisement
