Page 1
ASSEMBLY INSTRUCTIONS #257B183672Z5PBK | #257B183672Z4PBK Boltless Shelving PARTS LIST Upright Short Beam Long Beam Supporting Bar Particle Board Plastic End Cap Wall Anchoring Kit Check for any damages and make sure to have all correct pieces before assembly. STEP 1 STEP 2 Place post caps on the bottom of the 4 posts.
Page 2
ASSEMBLY INSTRUCTIONS STEP 3 Upright Upright Place a short beam in between two posts on the inside of the posts at the desired shelf height. Insert the circular rivet into the large circular opening and press down so that it slides into the narrower slot. Secure the beam in both posts.
Page 3
ASSEMBLY INSTRUCTIONS STEP 5 Attach the midsection support bar(s) to the long beams by inserting the teeth of each support bar into the openings on the long beams. The midsection support bar(s) Support Bar should run parallel with the short beams. Note: The number of midsection support bars included for each shelf is dependent on shelf size.