Britton CAMBERWELL C60D Series Manual

Please read these instructions carefully before starting installation and keep in a safe place for future
reference. ENSURE the room is well heated and ventilated.
Check the contents of the pack carefully before installation. Bathroom Brands will not be heid
responsible for any de-fit / re-fit costs where faulty product has been fitted.
If any fault is found with materials or workmanship, it must be reported immediately to the
manufacturer. Remedial action will be taken, based on information received, on condition that: 1. Full
details are supplied to the manufacturer. 2. The product has not been modified or tampered with; 3. The
manufacturer is informed of any damage/shortages prior to installation. 4. The product has not been
installed, or attempts have been made to install.
We do not accept responsibility for any problems that may occur through incorrect installation.
Advice & Safety
This product should only be installed by a suitably qualified Plumber/installer. Should the installation be
completed by a non-qualified person any product guarantee maybe considered invalid. For a claim made
under our warranty written certification of your installers qualifications can be required.
It is advised that all doors and drawers are removed prior to fitting to avoid unnecessary damage
occurring. It is recommended that the furniture and accessories are installed after tiling, ensuring that
the product is installed flat to the tile face and allows product to be easily removed if required in the
future.
This document has been prepared for your guidance, you must exercise due care at all times.
Please note that some units are heavy. Always take care when lifting, and
follow health and safety guidelines. It is recommended that 2 people carry out the installation of larger
basin/vanity units over 30Kgs gross weight.
Warning! ! Please check for any hidden pipes or electrical cables before drilling holes in the floor or
walls. When using power tools always follow the manufacturer's user instructions.
This installation guide details fitting to a solid wall. If your bathroom has studded/plasterboard walls,
please use appropriate plasterboard fixings. Please ensure the wall can take weight of units detailed
above. Before installing a wooden bathroom unit into a new property, extension or recently plastered
room we strongly advise the building/room is completely dry, well ventilated and adequately heated.
CAMBERWELL
C60Dxx 30kgs
C80Dxx 35kgs
C100Dxx 40kgs