Summary of Contents for Eelectron TR22D01KNX
- Page 1 TR22D01KNX Transponder Reader - 13.5MHz TH22D01KNX Transponder Holder - 13.5MHz USER MANUAL Translation of the original instructions Version: 1.1 Date: 15/Jan/2024...
- Page 2 TR22D01KNX | TH22D01KNX Contents Purpose of the manual ................................4 Products overview ..................................4 Installation instructions ................................4 Configuration and commissioning ............................. 4 General parameters .................................. 5 General alarms ................................... 5 Access Control ..................................5 LEDs-RGB Led ..................................5 Sinlge relay and Relays with interlock ............................5 Digital Input ....................................
- Page 3 TR22D01KNX | TH22D01KNX Any information inside this manual can be changed without ad- vice. This handbook can be download freely from the website: www.eelectron.com Exclusion of liability: Despite checking that the contents of this document match the hardware and software, deviations cannot be completely exclu- ded.
- Page 4 This manual is intended for use by KNX® installers and descri- The device can be used for permanent internal installations in bes the functions and parameters of the products TR22D01KNX dry places. – KNX transponder reader and TH22D01KNX – KNX tran-...
- Page 5 In the TH22D01KNX – KNX transponder holder device the “LEDs” function is not available. By selecting “yes”, the device will send the date and time update re- quest to the connected group address on the bus. In the TR22D01KNX device – KNX transponder reader Outputs individual / coupled the RGB “Access control” function is not available.
- Page 6 TR22D01KNX | TH22D01KNX Object used to manage scenarios for multiple outputs subordinating In the devices described, the “Relay status at power the different blocks to this global function. OFF” parameter cannot be configured; in the event of “<Global Single> Dyn Scene” 1 bit a drop in the auxiliary voltage, the contact of the relays is Object used to enable / disable dynamic scenarios.
Need help?
Do you have a question about the TR22D01KNX and is the answer not in the manual?
Questions and answers