Five CDC1 Manual
  1. Manuals
  2. Brands
  3. Five Manuals
  4. Monitor
  5. CDC1
  6. Manual

Five CDC1 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CDC1 Specification

Advertisement

Table of Contents
loading

Summary of Contents for Five CDC1

  • Page 1 CDC1 Specification...

  • Page 2: Table Of Contents

    Schedule: error code definition table ..................16 1、 About the user manual Dear users, To ensure better performance of your ebike, please read through the CDC1 inspection carefully before using it. We will inform you of all the details, Page...

  • Page 3: 2、 External Dimensions

    2、 External Dimensions Material and Color CDC1 products use the LCD display, double PCB, nylon buckle, ABS material shell, dip plastic parts. Under the temperature ranging from -20℃ to 60℃, the shell material can ensure normal usage and good mechanical performance of the products.
  • Page 4 Fabbrica Italiana Veicoli Elettrici greatly simplify the handlebar cable. CDC1 function Summary(Figure in 3 ◆ Total distance indicator ◆ Riding distance indicator ◆ Current speed indicator ◆ Backlight indicator (switch backlight) ◆ PAS level selection ◆ Battery residual capacity indicator ◆...

  • Page 5: 4、 Button Definition

    Fabbrica Italiana Veicoli Elettrici Figure 3-3 Normal Viewing Area(backlight) Figure 3-4 The product type of the left and right display that used to fit different models. Button Definition 4、 Button Definition CDC1 has four buttons including ON/OFF、SET、UP and DOWN Page of 20...

  • Page 6: 5、 Installation Instructions

    Fabbrica Italiana Veicoli Elettrici Figure 4 5、 Installation Instructions Display will be fixed on the handlebar, and then adjust the angle of view, and will be installed in the position of the button is easy to control. Tighten the screws to complete the installation.

  • Page 7: Display Interface

    Fabbrica Italiana Veicoli Elettrici figure 6-1. figure 6-1 Turn on power by holding the UP button for 3 seconds to turn off the system power. The operation process as shown in figure 6-2. figure 6-2 In the off state, the display is no longer used batteries, the leakage current is less than 2µA.
  • Page 8 Fabbrica Italiana Veicoli Elettrici ※The definitions of 3 and 4 mentioned in the paper are shown in Figure 4. When the electric power assisted vehicle is in operation, the circuit board monitors the speed value of the speed monitoring device to the display 3. When trottle4 is pressed, throttle 4 sending control signals or brake control voltage to circuit board,circuit board according to the speed signal, Sending speed control signals to the governor.Display through the display 3: Current speed indicator, total distance...

  • Page 9: C.turn On (Off) Backlight

    Fabbrica Italiana Veicoli Elettrici figure 6-4 PAS level indicator as shown in figure 6-5.( The following figure is 2 stalls) figure 6-5 Battery indicator as shown in figure 6-6.( The remaining power of 2) figure 6-6 C.Turn on (off) backlight Click on the button, wait for the display to initialize the 2S, the displaybegan to work.
  • Page 10 Fabbrica Italiana Veicoli Elettrici figure 6-7 The effect of turning on the backlight is shown in Figure 6-8. figure 6-8 When the display is turned on the backlight, if you want to turn off the backlight, long press the DOWN button and then release the button,the backlight off. ※...

  • Page 11: Pas Level Selection

    6-9. figure 6-9 e. Battery indicator When the battery is full of electricity, the icon of five full light. When the battery voltage, the last frame icon flashes. You need for immediate charging. As shown in figure 6-10.

  • Page 12: F.error Code Definition

    Fabbrica Italiana Veicoli Elettrici figure 6-10 f.Error code definition When the electric control system of the electric bike is out of order, the display will automatically display the error code and stop working properly. Only when the fault is excluded ,you can exit the fault display interface (even if the display is closed without removing the fault, restart the instrument can not work).
  • Page 13 Fabbrica Italiana Veicoli Elettrici figure 7-1 The operation process as shown in figure 7-2. figure 7-2 By UP or DOWN button to select the corresponding wheel diameter, to ensure that the display speed indicator and mileage indicator accuracy. If there is no operation for up to 2 seconds, the display will automatically exit wheel diameter.

  • Page 14: Pas Level Selection

    Fabbrica Italiana Veicoli Elettrici Instrument factory default wheel diameter value is 12. Set wheel diameter parameter operation as shown in Figure 7-3. Figure 7-3 The numerical value of the wheel diameter is shown in Figure 7-4 .(the diameter of the wheel is 12) Figure 7-4 (2)PAS level selection When the click the UP button, the display starts to work.

  • Page 15: 8、 Cable Outlet Define

    PAS level.You need to ride a distance to speed up。 8、 Cable outlet define CDC1 multi-function LCD display for the 8 pin Cable outlet define, the use of 24V/36V/48V battery voltage supply, followed by the power of the positive, ground, weak lock, turn the signal cable, communications R, communications T, 5V, light cable.
  • Page 16 Fabbrica Italiana Veicoli Elettrici CDV12L_B。As shown in the Figure 8： Figure 8 Page of 20...

  • Page 17: 9、 Q&A

    Fabbrica Italiana Veicoli Elettrici 9、 Q&A Q：Why the display is not able to start up？ A：Checking the connector that between display and controller. Q：How to deal with the error code? A：Fix it to the maintenance place immediately. If cannot be resolved, you can go to the electric vehicle repair points repair it in a timely manner.
  • Page 18 Fabbrica Italiana Veicoli Elettrici supply cable is not connected well/ Controller phasemissing. Display can be turned on, but after working 3 seconds stop working. Possible reasons: the display and the controller connected to the green, yellow cable of any 1 cables open.

Table of Contents