Advertisement
4.
OPERATION
WARNING! Ensure you read, understand and apply the safety instructions in
‰
Section 1 before using the fan.
WARNING! DO NOT clamp the fan to any electrical or sensitive electronic
‰
equipment or any surface or object that is too flimsy to resist the force of the spring
loaded clamp and/or the weight of the fan.
4.1.
Mount the fan in a suitable location, using the spring loaded clamp to attach it to a
suitable table, shelf or other stable solid surface. Adjust the fan to the desired angle
required.
4.2.
CHARGING THE UNIT
Plug the supplied USB cable into the USB charging port in the back of the fan.
9
4.2.1.
The fan will charge when plugged into a USB supply. See fig.1. Allow 6 hours to fully
charge. The green LED light will illuminate when charging commences. Subsequent
charging times will depend on the state of discharge of the battery.
4.3.
USING THE FAN
4.3.1. Four fan speed options which are easy to use. Low, Medium, High, and natural
speed. A green LED light indicates fan speed. See table below 'Fan speed
Operation'.
4.4.
Select fan speed by pressing the button on the left hand side. See fig.2. See
table below for fan speed operation.
FAN SPEED OPERATION
Press button Once
Power ON/Low Speed 1st green LED light indication light
Press button Twice
Medium Speed
Press button 3 Times
High Speed
Press button 4 Times
Natural Speed
Press button 5 Times
Power Off
4.5.
USING THE WORK LIGHT
4.5.1.
Two work light settings. 50% and 100% brightness options. See table below.
4.6.
Select the right hand side button indicated in fig.3 for work light brightness
settings.
LIGHT OPERATION
Press button Once
Press button Twice
Press button 3 Times
4.7.
POSITIONING THE WORK
LIGHT
4.8.
Position work light to the
desired position using the clip
on the base of the fan.
4.9.
Strong clip and magnet base
means you can position the
fan in any place at any time.
Note: There is also a thread
on the clip for a tripod stand
to attach. (Tripod stand not
included).
4.10.
IDENTIFICATION
1.
LED light switch.
2.
LED indicators.
3.
Fan switch.
4.
USB-A output.
5.
Type C charging port.
6.
USB-A to USB-C cable.
© Jack Sealey Limited
illuminated.
2nd green LED light indication
light illuminated.
3rd green LED light indication light
illuminated.
All green LED lights are
illuminated.
-
50% brightness.
On with full brightness.
OFF.
Original Language Version
fig.1
fig.2
fig.3
SCF8WL Issue 1 24/11/23
Advertisement
