Table of Contents
Advertisement
IMPORTANT
The
lightning
flash
with
arrowhead,
within
an
equilateral triangle, is intended to alert the userto
the presence of uninsulated "dangerous voltage"
within the product's
enclosure
that may
be of
sufficient magnitude to constitute a risk of electric
ies shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SER-
VICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
READ INSTRUCTIONS — All the safety and operating
instructions should be read before the product is
operated.
RETAIN INSTRUCTIONS — The safety and operating
instructions should be retained for future reference.
HEED WARNINGS — All warnings on the product and
in the operating instructions should be adhered
to.
FOLLOW
INSTRUCTIONS
—
All operating and use
instructions should be followed.
CLEANING — The product should be cleaned only with
a polishing cloth ora soft dry cloth. Never clean with
furniture wax, benzine, insecticides or other volatile
liquids since they may corrode the cabinet.
ATTACHMENTS
—
Do
not
use
attachments
not
recornmended by the product manufacturer as they
may cause hazards.
WATER
AND MOISTURE
—- Do not use this product
near water —
for example,
near a bathtub, wash
bowl, kitchen sink, orlaundry tub; inawetbasement:
or near a swimming pool; and the like.
ACCESSORIES
—
Do not place this product
on an
unstable cart, stand, tripod, bracket, cr
table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
with
a cart,
stand,
tripod,
bracket,
or table
recommended
by the manufacturer,
or sold with
the product. Any mounting of the product should
follow the manufacturer's instructions, and should
use a mounting accessory recommended
oy the
manufacturer.
CART
—
A product and cart combination
should
be
moved with care. Quick
stops, excessive force, and
uneven
surfaces may cause the product and cart
combination to overturn.
VENTILATION — Slots
and openings in the cabinet are
provided
for ventilation
and
to ensure
reliable
operation
of the pre
i
ea
it from
overheating,
and
blocked or cove
blocked by placing the produc stona
or other similar surface.
This produ
placed in a built-in eee
such
rack unless
proper
manufacturer's in
POWER SOURCES — This
only from the type A cancers
marking label. If you are not sure of the
power supply to your hor
dealer or local power company.
LOCATION - The appliance should be installed in a
stable location.
NONUSE
PERIODS — The power
cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time
nould never -
2 bed, sofa, r
ould not ss
ookcase or
onsult your
information to User
Alteration or modifications carried out without appropriate a
GROUNDING
OR POLARIZATION
@
If this productis equipped with a polarized alternating
current line plug (a plug having one blade wider than
he other), it will
fit into the outlet only one way. This
isa safety feature. If youare unable to insert the plug
ully into the outlet, try reversing the plug. If the plug
should
still fail to fit, contact
your electrician to
eplace your obsolete
outlet.
Do not defeat
the
safety purpose of the polarized plug.
@
If this
product
is equipped
with
a three-wire
grounding type plug,
a plug havinga third (grounding)
pin, It will only fit into a grounding type power outlet.
This is a safety feature. lf you are unable to insert the
plug into the outlet,
coriact
your
electrician
to
replace
your obsolete
outlet.
Do not defeat
the
safety purpose of the grounding type plug
POWER-CORD
PROTECTION
—
Power-supply cords
should be routed
so that they are not likely to be
walked on of pinched' by items
placed
upon
or
against them, paying particular attention to cords at
plugs, convenience r e
cles, andthe point where
they exit from the product.
OUTDOOR
ANTENNA
GROUNDING
—
If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system ts
grounded so
as to provide some
protection against voltage surges
and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and
supporting structure,
grounding of the lead-i
to an ante
size of
conduc
connection
to
grou
requirements
for the gro
FA,
LIGHTNING
—
For added protection for this product
duringa lightning storm, or when itis left unattended
and unused for long periods of time, unplug it fror
the wail outlet and disconnect the antenna or cable
system.
This will prevent dar
o the product
due to lightning and power-line
:
POWER
LINES — An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or nets it
can fall into such
power
lines or circuits. When
installing an outside antenna system, extrer me care
should be taken
om touching
such power
lines or circuits as con
with them right be fatal.
OVERLOADING
—
Do
not
wall
outlets
onvenience
fire or electric s
The
exclamation
point
within
an
equilateral
triangie is intended to alertthe user tothe presence
of
important
operating
and
maintenance
(servicing)
instructions
in
the
literature
accompanying the appliance.
any kind into this product t
¢
gs
may touch dangerous
voltage points or short-out
parts that could
Never spd | Hig
SERVICING
yoursel
\
g j is darnaged.
wees ee
ar objects have fallen into
®
r liquid ha
the product
@
|f the product has been exposed to rain or water.
®
(ithe product does not operate normally by following
the operating instructions, Adjust
only those controls
that are covered by the operating instructions as an
improper adjusiment of other controls may result in
damage and will often require extensive work by a
qualified technician
to restore
ihe product
to its
normal operation
@
lf the product has been dropped or damaged in any
VY.
performance —
this indicat
REPLACEMENT
PARTS
are required, be suret
y the manufacturer o
eristics as the original part.
ions may resultin fire, electric
"be
tuated away from
heat
tregisters, stoves, or
\olifiers) that produce
a wall
f
i should §
sources such as radiators,
other products {including an
heat,
NDING CONDUCTORS
ECTION 810-21)
OUNDING
M
H)
<ARB7091>
Advertisement
Table of Contents
