Page 1
*Colours may vary Supershine Straightener Model No: NSS216-C / NSS252-C / NSS253 / NSS255 INSTRUCTION BOOKLET HOUSEHOLD USE ONLY Please READ and RETAIN for future reference...
Page 2
PLEASE RETAIN FOR FUTURE REFERENCE Thank you for purchasing your Nicky Clarke Supershine Straightener. To get the best from your new straightener, take a few moments to read these instructions and keep them in a safe place for future reference.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts.
Page 4
• EU ONLY: If this appliance is used in a bathroom you MUST install a residual current device (RCD) with a rated operating current not exceeding 30mA in the electrical circuit supplying the bathroom. An electrician will advise you of this.* •...
Page 5
• This appliance is authorized for household/residential use only DO NOT operate this appliance for anything other than its intended use. • DO NOT allow to be used as a toy. Close attention is necessary when used by or near children. •...
Feature Diagram The illustrations in these instructions may differ slightly from the actual unit supplied. Heat setting display On/off button Temperature decrease button Temperature increase button Temperature lock button Storage lock Swivel cord Water reservoir Steam button Ceramic ionic plates For Customer Services please call 0345 209 7461 Or visit us at www.nickyclarke.com...
Page 7
Preparing for Use 1) Remove all packaging and keep it safe until you are satisfied with your product 2) DO NOT plug in the straightener until you are ready to use it 3) Check the unit for any visual damage such as: a.
Page 8
2) Push the Release button down and towards you to release the water reservoir. Lift the reservoir upwards and out of the recess. 3) Lift up the plastic stopper on the reservoir. Use the small bottle provided to carefully pour clean water into the large hole in the reservoir.
Page 9
Ionic Technology Your straightener features ionic technology which produces a flow of negative ions which may help to enhance and condition your hair, neutralising natural positive ions, which create electrostatic electricity (which causes frizz). The ionic feature may help to rejuvenate your hair leaving it soft and shiny.
Page 10
4) Ensure that the arms of your straightener are fully open while they are heating. If the arms are in the locked position, twist the locking ring to the position. Always place your straightener on a solid, flat, stable, heat resistant surface.
Page 11
10) Separate a section of hair approximately 5cm in width and smooth it out with a brush. 11) Place the chosen section of hair between the plates of your straightener and close the plates. Take care not to touch the plates which are very hot with your fingertips. Hold the straightener in place until the section of hair is fully heated.
switched on, or cooling down. To use the lock close the straightener and twist the locking ring to the position. To open the straightener, twist the locking ring to the position. • Ensure your straightener is completely cool and dry. •...
be used on the outer case only). DO NOT immerse the unit in water or any liquid. 3) DO NOT use any harsh abrasives or cleaners as these will damage the appliance. NEVER ATTEMPT TO CLEAN THE STRAIGHTENER BY INSERTING AN IMPLEMENT If you have long hair or use large amounts of styling products, clean the plates regularly i.e.
Page 14
Connecting to the Mains Supply This appliance has been designed for BS Plug outlets only. It can be used with a suitable adapter, but under no circumstances should the plug ever be removed and changed for a different type. Any action to physically change the plug outside of changing the fuse will void the warranty on this appliance.
Page 15
Guarantee PLEASE RETAIN YOUR RECEIPT AS PROOF OF PURCHASE At Nicky Clarke, we take all our customer feedback seriously. Contact our Customer Service Team, on 0345 209 7461 who will be more than happy to assist you. This product is guaranteed for 12 months from the date of the original purchase.
Need help?
Do you have a question about the NSS216-C and is the answer not in the manual?
Questions and answers