Table of Contents
Advertisement
6
www.aeg.com
3. PRODUCT DESCRIPTION
3.1 Appliance overview
1
3.2 Installation on suspended
flooring
Suspended wooden floors are
particularly susceptible to vibration.
To limit vibration we recommend placing
a waterproof wooden panel, at least 15
mm thick, under the appliance. It should
be screwed to at least 2 floor beams and
should extend beyond the front feet.
If possible, install the appliance where
the floor is more stable.
3.3 Available from your
authorized dealer
Only appropriate
accessories approved by
AEG ensure the safety
standards of the appliance. If
unapproved parts are used,
any claims will be
invalidated.
Fixing plate kit (4055171146)
Available from your authorised dealer.
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
Read carefully the instructions supplied
with the accessory.
2
3
Worktop
1
Detergent dispenser
2
Control panel
3
Door handle
4
Rating plate
5
4
Drain pump filter
6
5
Feet for levelling the appliance
7
6
7
Stacking kit
Available from your authorized vendor.
The tumble dryer can be stacked on the
top of the washing machine only by
using the correct stacking kit
manufactured and approved by AEG.
The compatible stacking kits are:
• SKP11/STA9 - If the tumble dryer
depth is 54 cm or 60 cm.
• STA8 - If the tumble dryer depth is 54
cm.
The stacking kit can be used only with
the appliances specified in the leaflet
provided with the accessory.
Advertisement
Table of Contents
