Adjust the limit stops with care Protect the drives against damage, dust, humidity or dirt. Use the correct adjustment device (see catalogue). Store the drives only in dry and well-ventilated rooms. Teal Products Ltd +44 (0)1242 620318 Unit 8A, Orchard Trading Estate, sales@tealproducts.co.uk Toddington, Cheltenham, www.
Opening and closing operation ole reversal of operating voltage -15 bis 70°C mbient temperature non-condensing) Enclosure rating IP 32 Teal Products Ltd +44 (0)1242 620318 Unit 8A, Orchard Trading Estate, sales@tealproducts.co.uk Toddington, Cheltenham, www. tealproducts.co.uk GL54 5EB, UK...
Calculation formula (24V DC) for the required core cross-section of a supply cable. Note A(total m(length ply line ² V (voltage drop ²) Teal Products Ltd +44 (0)1242 620318 Unit 8A, Orchard Trading Estate, sales@tealproducts.co.uk Toddington, Cheltenham, www. tealproducts.co.uk GL54 5EB, UK...
Page 6
Insert the complete jack into the drive. Ensure the correct seating of the latching nose (RN). Insert plug from diagonally above. Turn the plug downwards until the upper edge rests against the side part Push the plug in. Teal Products Ltd +44 (0)1242 620318 Unit 8A, Orchard Trading Estate, sales@tealproducts.co.uk Toddington, Cheltenham, www.
Danger of crushing and shearing points on the closing Please note: edges of the window. For a pairing of a maximum of 4 TCD1 drives no PEG2 is The drive can generate tractive and pressure forces in necessary in principle.
Important note: Despite the greatest possible care, no guarantee can be given for the accuracy of the contents of this publication. Teal Products Ltd +44 (0)1242 620318 Unit 8A, Orchard Trading Estate, sales@tealproducts.co.uk Toddington, Cheltenham, www.
Page 10
TCD1 Actuator TCD1 Actuator TCD1 Actuator TCD1 Actuator A maximum of 4 x TCD1 Actuators can be synchronised and wired in this way. Teal Products Ltd +44 (0)1242 620318 Unit 8A, Orchard Trading Estate, sales@tealproducts.co.uk Toddington, Cheltenham, www. tealproducts.co.uk GL54 5EB, UK...
Need help?
Do you have a question about the TCD1 and is the answer not in the manual?
Questions and answers