Magnavox AJ 3920 Manual page 9

Alarm
ALARM TIME
If you wish to use the alarm, then you
should first of all set the alarm time.
You may set two different alarm times.
General
e If the bH or K button is pressed once, the
alarm time will increase or decrease by one
minute.
e |f the Pi or K button is pressed for more
than 0,5 seconds, the alarm time will
increase or decrease by about 6 minutes per
second.
e |f the D! or Nd button is pressed for more
than 5 seconds, the alarm time will increase
or decrease by about 60 minutes per
second.
Setting alarm time 1:
e Keep ALARM 1 button pressed and set the
required alarm time with the bil and K
buttons.
The display will show the set alarm time.
Select the required alarm source by pressing
CD, RADIO or BUZZER once.
Release the ALARM 1 button.
The indicators will show that the alarm is
activated.
Setting alarm time 2:
e Keep ALARM 2 button pressed and follow
the same procedure as in "setting alarm
time 1".
CD WAKE UP TRACK
The CD wake up track number is a CD track
number between 01 and 99 which can be set
ioi both ALARM 1and ALARM 2.
e Press and hold the WAKE UP TRACK button
e Select ALARM 1 or ALARM 2 to program
the wake up track.
e Once CD has been programmed for ALARM
1 or ALARM 2, a particular track number can
be selected for the CD to start with at the
set alarm time.
NOTE
if the selected CD track number does
not exist on the CD in the compartment,
the unit will play the first track of the CD
instead.
CD wake up track
Buzzer
e Press and hold WAKE UP TRACK.
e briefly press ALARM 1 or ALARM 2 to
select the alarm.
- The display shows the selected alarm and
the track.
e Adjust the required track number by
pressing Dhl or or CD STOP/OFF.
- The display shows the selected alarm and
the selected wake up track.
e Release the WAKE UP TRACK button
SETTING BUZZER MELODIES
e You can set 5 different buzzer melodies for
both ALARM 1 and ALARM 2
e Keep the BUZZER button pressed and
select ALARM 1or ALARM 2 to set the
buzzer melody.
e The display will show the alarm number and
the buzzer melody number.
e To increase the buzzer melody number
press DH, and to decrease the melody
number press K.
e Press the BUZZER button (during stand by
mode) to hear the selected melody over the
speakers.
NOTE
It is recommended to use two different
buzzer melodies for the two alarms in
order to distinguish the alarms if both
are set to the buzzer alarm mode.
English