Panasonic SC-AK630 Operating Instructions Manual page 8

ENTER CURSORilY4
ALBUM/
SEARCH CHARA,
_,ALBUM/
DELETE CHARA
_/FF/A
STOP
CD
o To check program contents
Press [_, REW/V] or [l_q_{, A/FF]=
Every time you press the button:
[_ The track number and program order are displayed:
Program order is displayed, then album number and track
numb@r.
o To add to the program
[_ Do steps 2 and 3.
Do steps 2 -- 4=
o To dear the _ast track
Press [DEL]=
,, To cmear aH tracks
Press [_, CLEAR],
While "CLEAR ALL" is blinking, press the button again to clear all tracks,
o You cannot program CD-DA together with MP3 tracks.
o The program memory is cleared when you change a disc or
open the disc tray.
o You cannot program more than one disc for MP3.
RQT7834
You can program up to 24 tracks.
Remote controm only.
Preparation: Press [_/H, CD] and then [I CLEAR].
1 Press [PROGRAM].
"PGM" appears.
2 Press [DISC] and then [1]=[5] to semect the disc.
3 Semect the tracks with the numbered buttons.
To select a 2-digit track, press [>10] once then the two digits=
Repeat steps 2 and 3 to program other tracks,
4
Press [I_/H, CD] to start play.
Preparation:
1. Press [DISC] and then [1]-[5] to select the disc.
2. Press [m, CLEAR].
I Press [PROGRAM].
"PGM" appears.
2 Press [ALBUM ( _._ or ._ )] to select the album.
To select an a_bam directly, press the numbered buttons
after pressing [ALBUM ( _ or _ )].
To select a 2-digit album, press [>10] once then the two digits.
To select a 3-digit album, press [>10] twice then the three digits.
:3 Press [_4, REW/V] or [_bq, A/FF] to select the track,
To semect s track directly, press the numbered buttons after
pressing [_, REW/V] or [_,4, A/FF].
To select a 2-digit track, press [>10] once then the two digits=
To select a 3-digit track, press [>10] twice then the three digits.
4 Press [ENTER].
Repeat steps 2 -_4 to program other tracks.
5 Press [_/H, CD] to start play.
To exit program mode
Press [PROGRAM] in the stop mode. (You can replay your program
by pressing [PROGRAM] then [_/|l, CD].)
You can do the following whims "P" is dispmayed
Remote controm only.
Press [REPEAT] during pmay.
"O" is displayed=
To cancem repeat p_ay
Press [REPEAT] to clear "O"=
You can use repeat mode with program play (_ see left) and Play
Mode (_ page 7) functions.
You can mark one track each on the discs loaded so that you can
start play from them later.
I To mark a track
1 During p_ayor stop
Semect your desired track.
(,,_ page 6, "Basic play - Skip/Search")=
2 Hotd down [MARKER] untim "STORING" bminks on the
dispmay,
The selected track is stored in the marker of the current disc,
If a track is already stored in the marker, it will be replaced next time
you store a new track in the same marker.
I To recall marked track number in the current disc
a
During phy or stop
Press [MARKER] to recaIB a marker.
Play starts from the track recalled.
o "NO MARKER" indicates that the marker in the current disc is empty.
® The marker memory is cleared when you open the disc tray.
o You cannot use this function during program play or random play.