Advertisement

SOP9. BEDSIDE LOCKER

STEP 1. PREPARE

clean and dry. Carry out safety checks on the equipment as instructed in the user manual.
Place all warning/safety signs are correctly positioned around the area to be cleaned.
Wearing the disposable gloves, remove any large debris and place in the refuse sack.

STEP 2. SETTING UP

Fill/refill the water bottle to the correct level. Ensure the waste vacuum bucket is
empty. Open doors and windows in the area to allow the steam to ventilate.
STEP 3. LETS GET STARTED
lance. Connect the short steam lance to the steam and vacuum hose, ensuring you lock the
clip in position . Fit the steam and vacuum hose into the front of the machine ensuring the
steam flap clips into place. Turn the steam control knob (if applicable) to your desired
setting. Press the red steam trigger under the handle to dispense the steam.

STEP 4. CLEANING

systematically, ensure all surfaces are covered. Remove the short steam lance from the
hose, being careful as this will be hot!! Fit the squeegee insert into the suction hand tool;
connect to the hose pistol grip. Now using the steam and vacuum together, clean over all
locker surface areas to generate a dry and sanitised surface.
HAND STEAM MOP METHOD Fit the microfbre pad to the hand steam mop head, fit
universal adaptor to mop. Connect the hand steam mop to the steam only hose, ensuring
you lock the clip into position. Fit the steam only hose into the front of the machine
ensuring the steam flap clips into place. Turn the steam control knob (if applicable) to low
volume steam setting. Press the steam rocker switch on the top of the handle to dispense
the steam.

STEP 5. COMPLETION

away any splashes on the skirting boards. Steam clean all equipment that has been used
and tidy away, along with safety/warning signs. Dispose of gloves and refuse sack. Wash
and dry hands.
SOP9
Ensure protective clothing is worn as advised and your hands are
Set the machine ready for use as per the user manual supplied.
Fit the detail nylon brush to the short steam
Steam Clean all crevices , hinges and other detailed areas. Work
Use the correct colour coded cloth or paper towel to wipe
SEE HEALTH & SAFETY ON REVERSE
MATRIX TRAINING & SUPPORT
Healthcare
Steam Operating Procedures

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOP9 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Matrix SOP9

  • Page 1 SOP9 Healthcare Steam Operating Procedures SOP9. BEDSIDE LOCKER STEP 1. PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry. Carry out safety checks on the equipment as instructed in the user manual. Place all warning/safety signs are correctly positioned around the area to be cleaned.
  • Page 2 Always Think Health & Safety DO - Read and understand user manual before carrying out any cleaning tasks DO - Display Safety/Warning signs in the correct places DO - Lock the steam trigger before changing or connecting accessories DO - Report any problems or damage to the machine immediately DO - Maintain the machine in accordance with instruction manual DO - Use the correct specification of extension lead suitable for the machine DO - Ensure correct PPE is worn...

Table of Contents