Advertisement
SL-PS670A
mCaution for AC Mains Lead (For United Kingdom)
("EB"' area code model only)
For your safety, please read the following text care-
fully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 5-ampere and that
itis approved by ASTA or BSI to BS1362.
Check for the ASTA mark @> or the BSI mark Y on
the body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
CAUTION!
IF THE FITTED MOULDED
PLUG IS UNSUIT-
ABLE FOR THE SOCKET
OUTLET
IN YOUR
HOME
THEN
THE
FUSE
SHOULD
BE
RE-
MOVED AND THE PLUG CUT OFF AND DIS-
POSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRI-
CAL SHOCK
IF THE CUT OFF PLUG
IS IN-
SERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician.
IMPORTANT
If the socket outlets in the home are not suitable for the
plug supplied with this appliance it should be cut off
and an appropriate three pin plug fitted.
The wires in this mains lead are coloured
in accor-
dance with the following code:
Blue:
Neutral
Brown:
Live
Do not connect either wire to the earth terminal in the
plug which is marked by the letter "E" or by the safety
earth symbol -L or coloured green or green-and-
yellow.
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured mark-
ings identifying the terminals in your plug proceed as
follows. The wire which is coloured BLUE must be con-
nected to the terminal which is marked with the letter N
or coloured BLACK.
The
wire which
is coloured
BROWN
must
be con-
nected to the terminal which is marked with the letter L
or coloured RED.
Before use
Remove the connector cover as follows.
Connector
cover
How to replace the fuse
1. Open the fuse cover with a screwdriver.
Advertisement
