Page 1
ELECTROCOMPANIET SPIDER CD Clam p For EMC 1 or EMC 1 UP Owner's Manual...
Page 2
Welcome to the world of Electrocompaniet! We thank you for choosing an Electrocompaniet high-end product. At Electrocompaniet we are relentlessly focused on developing audio equipment that is capable of bringing the fabulous experience of the concert hall into the very heart of your home.
Page 3
Unpack the unit carefully. Save all packaging materials for future shipment. The contents of the carton • 1 pc. Electrocompaniet SPIDER for EMC 1 or EMC 1 UP • 1 pc. Solid cone spindel...
Page 4
Remove spring cone EMC 1 CD-Pro 1 Remove spring Cone See Fig. 1: Lift-off the spring cone e.g. by using a pair of tweezers. Figure 1 Remove turntable ring See Fig.2: Lift-off the plastic turntable ring e.g. by using a pair of tweezers. Figure 2...
Page 5
Remove solid cone EMC-1 CD-Pro 2 Remove solid Cone See Fig. 1: Lift-off the solid cone e.g. by using a pair of tweezers. Figure 1...
Page 6
Replacement of solid cone CD-Pro & 2 Mount solid cone See Fig. 1: Place the new solid cone over the plastic turntable and push down gently until it touches the turntable surface. Do NOT apply any glue. Warning: Do NOT exceed maximum force allowed to turntable. Figure 1...
Page 7
When shipping a product to the factory for service, always include the following: 1. A sales slip or other proof of purchase if repair is claimed under warranty. 2. A proforma invoice with value of goods, stating that the Spider Clamp is returned to Norway for repair.
Page 8
Made in Norwa y WWW. ELE CTROCOM PAN I ET. COM Rev.1.7...
Need help?
Do you have a question about the SPIDER and is the answer not in the manual?
Questions and answers