Advertisement
Location and Function of Parts and Controls
El
16/64 COLOR
a DIGITAL
8 COLOR
A
ANALOG
SUPERIMPOSE
= ON D OFF
RAGE A
AGBA
CONTRO!
RGB À
AGB B
AUDIO
SELECT
AC IN connector
Connect the supplied power cord.
LINE A
To monitor the input signal fed through this line input,
press the LINE A input select button on the front panel.
VIDEO IN connector(BNC type)
AUDIO IN jack(monaural}(phono type)
Connect to the video and audio outputs of video
equipment such as VCRs or video disc players.
For a loop-through connection, connect to the video and
audio outputs of another monitor.
VIDEO OUT connector(BNC type)
AUDIO OUT jack(monaural)(phono type)
For a loop-through connection, connect to the video and
audio inputs of another monitor.
When a connecting cord is connected to the VIDEO
OUT connector, the 75-ohm termination of the input is
automatically released and the signal input to the
VIDEO IN connector is output from this connector.
=
=
Po ES)
[5] LINE B
To monitor the input signal fed through this line input,
press the LINE B input select button.
Y/C 75 Q termination switch
When only the Y/C IN connector is connected (i.e.
nothing is connected to the Y/C OUT connector), set this
switch to ON.
When both Y/C IN and OUT connectors are connected
together for a loop-through connection, set this switch to
OFF.
Y/C IN connector(4-pin mini-DIN)
Connect to the Y/C output of video equipment.
AUDIO IN jack(monaural}(phono type)
Y/C OUT connector(4-pin mini-DIN)
For a loop-through connection, connect to the Y/C input
of another monitor.
AUDIO OUT jack(monaura!l)(phono type)
Advertisement
