Altech JS-084 Manual

All SWingGate Openers (SW-01,
a
AL TECH JS-084
Outdoor Receiver Manual
FOR ALL SWING GATE OPENERS
HOW TO CONNECT AN OUTDOOR RECEIVER ON EG-22A
SW-01A SW-02,
1.) Connect the blue wire. from the NO socket in the outdoor receiver to the
2 SIDE socket in the EG-22A control board.
O
2.) Likewise, connect the green wire
receiver to the 1 SIDE socket in the
3.) Then, connect the red wire from the
•
to the second 12V socket in the EG-22A
4.) Lastly, connect the the three black wires • from the the two
socket in the outdoor receiver
(as shown in the diagram below)
and 12Vsocket in the EG-22A control board.
l � H�
� � � �
�
0@@©@©(J)
■
■ 12V
coM
0
1 SIDE
■
2SIDE
& EG-22A wntrol Boord for Swng Gates with dose-up view of wi r es-tlrsockPts connection.
SW02L, SW03A SW03L,
SW-02Sl., SW-03,
(1st socket on the control board)
from the socket in the outdoor
CM
EG-22A control board.
(3rd socket on the control board)
VDD socket in the outdoor receiver
control board.
(7th socket on the cont rol board)
CM sockets and
to the the two
COM
(2nd &5th sockets on the control board)
STARTsocket
For Sliding Gate Openers SL-22013 model
FOR SL-22O13
HOW TO CONNECT AN OUTDOOR RECEIVER ON EG-12
SW-04)
1.) Connect the red wire
12VAC socket in the
2.) Connect the bl ack wire • from the VDD socket in the outdoor receiver to the right
12VAC socket in the
3.) Connect the blue
PHOTON.C. socket in the
4.) Lastly, connect the g reen wire
GND
in the
sockets
■
■ RV(12VAC)
RV(12VAC)
0
■
START
coM
EG-12control
•
from the GND socket in the outdoor receiver to the left
board.
(15th socket on the control board)
EG-12 control board.
(14th socket on the control board)
wire. from the CM socket in the outdoor receiver to the right
EG-12 control board.
(8th socket on the control board}
Q
from the NO socket in the outdoor receiver to the
EG-12 control board.
(10th socket on the control board)
A f G-12 (Dntrol Boord for Sliding Gates wlh dose-up view of wires-to-sodiets conneltion.