ETT MASTA RING Instruction Manual

Spotlight EINLICHT
for track system, GU10, ØxL 60x110 mm, black

DISPOSAL INSTRUCTIONS

By separating materials, recycling and disposing of old
equipment in this way, you are making an important
contribution to protecting our environment.
Packaging can be returned to appropriate
collection points for free.
WEEE disposal note
According to the European WEEE Directive, electrical and
electronic WEEE Directive, electrical and electronic
equipment must not be disposed of with household waste.
Their components must be recycled or disposed of
separately, because toxic and hazardous components can
cause lasting damage to health and the environment if
disposed of improperly.
As a consumer, you are obliged under the Electrical and
Electronic Equipment Act (ElektroG) to return electrical and
electronic equipment free of charge at the end of its service
life to the manufacturer, the point of sale or to public
collection points set up for this purpose.
Details are regulated by the respective state law.
The symbol of the wheeled garbage can on the product,
the operating instructions and/or the packaging refers to
these regulations.

SAFETY INSTRUCTIONS

• Before putting the device into operation, check for
damages. If this is the case, please do not operate
the device.
• Note that any technical modifications to the device will
immediately void its approval!
• Keep the user manual for the device.
• Avoid looking directly into the light source
to prevent eye injury.
• Do not drop the device; it could be damaged upon
impact with a hard surface.
• Avoid installing the device in locations with significant
temperature differences or high humidity.
• Do not leave the packaging materials lying around;
plastic films/bags, Styrofoam parts, etc., could become
dangerous toys for children.
• Keep the device out of the reach of children; it is not a toy!
Made by ETT Distribution GmbH, Schmalbachstraße 16, 38112 Braunschweig
Item number: 145335
Instruction manual
„MASTA RING"
www.ett-online.de | Tel. +49 531 58 11 00 | service@ett-online.de
Reprinting or reproduction only with expressed permission.

TECHNISCHE DETAILS

Rated voltage:
Socket typ:
Power:
Mounting type:
Supplied without light source

INTENDED USE

• The product is suitable for indoor use.
• The product should only be used for its intended purpose
as specified in this user manual.
• The product is only intended for use with rail systems.

INSTALLATION

Preparation:
• Turn off the fuse for the rail system.
• Check for voltage absence with a suitable
measuring device.
• Carefully unscrew the trim ring at the front
of the luminaire.
Step 1 Insert the GU10 light bulb.
Step 2 Screw the trim ring onto the luminaire.
Step 3 Release the lever for the rail system.
Step 4 Insert the luminaire into the rail system.
Step 5
The safety lever is released automatically when
inserted into the rail.
Step 6
Tighten the lever from Step 3 until it clicks.
Turn the fuse back on and check the functionality.
Status: 11/2023
250 V
GU10
max. 10 W for LEDs
max. 35 W for halogen
3-phase track