DODOELEPHANT K-04 Instruction Manual

K-04
Instruction manual
Thank you for purchasing one of our toy products. To ensure that you get the most out of your new purchase, please
read these instructions carefully before using the toy for the first time. They contain important information on how to
operate the product.
Caution：
Electrical product
This product is not suitable for children aged 8 or under. When using electrical products, precautions must be taken
to prevent the risk of an electric shock.
Ensure adult supervision at all times
Warning: Do not attempt to modify or re-assemble this product. Unauthorized changes may void your right to use the
product.

Charging the batteries

1. Insert the USB plug into an indoor USB power supply, and then connect the battery compartment to the charging
cable.
2. The charging time is 5 hours. When the battery is charging, the light is red on. When the battery is full, the light is off.
3. Regularly inspect the toy, battery charger, charging cable, connectors and other components for signs of damage. In
the event of any damage, discontinue use and send the parts for repair.

Calibrating the vehicle

Left/right
ON/OFF
calibration dial

Inserting the remote control batteries

1. Observe the polarity markings on the battery compartment to ensure that the
batteries are inserted in the correct polarity.
2. Attach the cover to the battery compartment as shown in the diagram below.
3. Insert rechargeable batteries into
the battery compartment.
4. Use a screwdriver to secure the
battery compartment cover in place.
4x1.5V "AA"
1:16
Monster
truck
Steering wheel
Throttle
ON/OFF
+1(718)312-0558(USA)
+49 335-4551-9201(Germany)
usa@symatoys.com(US)
eu@symatoys.com(EU)
http://www.symatoys.com
Instructions:
Check that the ON/OFF switch is in the
"ON" position. The vehicle will not respond
to the remote control when the switch is in
the "OFF" position.
If the vehicle strays to the left, move the
calibration dial to the right until the vehicle
travels in a straight line.
If the vehicle strays to the right, move the
calibration dial to the left until the vehicle
travels in a straight line.
Inserting the battery
compartment into the vehicle
USB