ALC AWF53 User Manual page 11

Installing the Camera
To record videos you must insert a
w
MicroSD card (not included). Open the
compartment and insert a MicroSD Card.
Connect the small end of the AC adapter
x
to the camera's AC In Plug located at the
end of the bracket.
If desired, connect the network cable
to the RJ45 connector and then to the
router. See page 11.
Plug the other end of the adapter to a
y
120 volt AC standard power outlet. After
approximately 20 seconds the unit will
cycle around and up and down, and the
Power indicator will light red for a short
time and then blink to indicate it is ready.
— 9 —
INSTALLATION