Table of Contents
Advertisement
en Cleaning and servicing
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
The pump cap is comprised of two
parts which can be taken apart for
cleaning.
Ensure that the impeller in the
3.
drain pump can rotate.
Insert the pump cap.
4.
Ensure that the parts of the
‒
pump cap are correctly as-
sembled.
36
Screw the pump cap as far as it
5.
will go.
90°
The handle on the pump cap must
be in a vertical position.
Insert and close the service flap.
6.
2
1
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run a suitable programme
for draining after you have emptied
the drain pump.
Open the water tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Select a suitable programme for
5.
draining.
→ "Programmes", Page 23
Advertisement
Table of Contents
