Advertisement
Get started
1
Connect the charger
Configure your phone
3 Please set the country and language if prompted.
4 Set the date and time.
• If the time is in 12-hour format, press
or [pm].
Connect each end of the
power adapter to:
• the DC input jact at the
back of the extra handset
charger;
• the power socket on the
wall
1 The batteries are pre-
installed in the handset.
Pull the battery tape off
from the battery door
before charging.
2 When using your phone
for the first time, you
see a welcome message
(country dependent).
to select [am]
Charge your phone
Place the handset on the charger to charge the handset.
When the handset is placed correctly on the charger, you
hear a docking sound.
The handset starts charging.
»
Note
• Charge the batteries for 8 hours before first use.
Check the battery level
Icon
Status
When the handset is off the base station/charger,
the bars indicate the battery level (full to low).
When the handset is on the base station/charger,
the bars flash until charging completes.
The empty battery icon flashes and you hear an
alert tone. The battery is low and needs recharging.
Charge 8 hours
Advertisement
