Advertisement
Get started
2
Configure your phone
1 The batteries are pre-installed in the handset. Pull the
battery tape off from the battery door before charging.
2 When using your phone for the first time, you see a
welcome message (country dependent).
3 Please set the country and language if prompted.
4 Set the date and time.
• If the time is in 12-hour format, press
or [PM].
Charge your phone
Place the handset on the base station to charge the handset.
When the handset is placed correctly on the base station,
to select [AM]
you hear a docking sound.
The handset starts charging.
»
• Charge the batteries for 8 hours before first use.
Check the battery level
Icon
Charge 8 hours
Note
Status
When the handset is off the base station/charger,
the bars indicate the battery level (full to low).
When the handset is on the base station/charger,
the bars flash until charging completes.
The empty battery icon flashes and you hear an
alert tone. The battery is low and needs recharging.
Advertisement
