Specifications; Installation - Vytronix WHV20ML Instruction Manual

Power consumption
Output
Operation Frequency
Outside Dimensions
Cavity Dimensions
. Ensure that all the packing materials are removed including from the inside of the door.
1
2. WARNING! Check the microwave for any damage, such as a misaligned or bent door,
damaged door seal and sealing surface, broken or loose door hinge or latch and dents
inside the cavity. If there is any damage, do not operate the microwave and contact
Vytronix UK Ltd immediately.
3. This microwave oven must be placed on a flat, stable surface to hold its weight and the
heaviest food likely to be cooked in the microwave.
4. Do not place the microwave where heat, moisture, or high humidity are generated, or
near combustible materials.
5. For correct operation, the microwave must have sufficient airflow. Allow 20cm of space
above the microwave, 10cm at back and 5cm at both sides. Do not cover or block any
openings on the appliance. Do not remove the feet or distance holders which ensure a
safe gap for circulation between the appliance and the wall.
6. Do not operate the microwave without glass plate, rotating support ring, and rotating
axel in place.
7. Check the power cord and plug for any damages and ensure the cord does not run
underneath the microwave.
8. The socket must be readily accessible so that it can be easily unplugged in an
emergency.
9. Do not use the microwave outdoors or any area prone to damp or humidity.
NOTE: When the microwave is first used, it may produce slight smoke and a smell. This is a
normal phenomenon because the microwave is made of a steel plate coated with
lubricating oil, and the new microwave will produce fumes and odour generated by
burning the lubricating oil. This phenomenon will disappear after a period of using.

SPECIFICATIONS

1150W
700W
2450MHz
W451*H258*D324
W297xH209xD296

INSTALLATION

Capacity
Weight
Control Type
Power Levels
Cooking
Uniformity
20L
11.2KG
Manual
5
Turntable system