Auto Prefix; Network Type; Select The Recall Duration; Dial Mode - Philips CD 690 User Manual

Auto prefix

This feature checks and formats your outgoing
call number before it is dialed out. The prefix
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prefix.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
•
The maximum length of a detect number is 5 digits. The
maximum length of an auto prefix number is 10 digits.
Note
•
This is a country dependent feature.
Set auto prefix
1
Select [Menu] >
press [OK] to confirm.
2
Enter the detect number, then press [OK]
to confirm.
3
Enter the prefix number, then press [OK]
to confirm.
» The setting is saved.
Note
•
To enter a pause, press and hold
Note
•
If the prefix number is set and the detect number is left
empty, the prefix number is added to all outgoing calls.
Note
•
The feature is unavailable if the dialed number starts
with * and #.
30 EN
> [Auto prefix], then
.

Network type

Note
•
This feature only applies to models with network type
support.
1
Select [Menu] >
then press [OK].
2
Select a network type, then press [OK].
» The setting is saved.

Select the recall duration

Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Select [Menu] >
press [OK] to confirm.
2
Select an option, then press [OK] to
confirm.
» The setting is saved.

Dial mode

Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
> [Network type],
> [Recall time], then