Phone Settings; Sound Settings - Philips CD 290 User Manual

10 Phone settings

You can customize the settings to make it your
own phone.

Sound settings

Set the handset's ringtone volume
You can select among 5 ringtone volume levels
or [Off].
1
Select [Menu] > [Phone setup] > [Sounds]
> [Ring volume], then press [OK] to
confirm.
2
Select a volume level, then press [OK] to
confirm.
» The setting is saved.
Set the handset's ringtone
You can select from 10 ringtones.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Ring tones], then press [OK] to
confirm.
2
Select a ringtone, then press [OK] to
confirm.
» The setting is saved.
Silent mode
You can set your phone to silent mode and
enable the silent mode for a specified duration.
When the silent mode is turned on, your phone
does not ring or send any alerts or sound.
Note
•
When you press to find your handset, or when you
activate the alarm, your phone still sends alert even
when the silent mode is activated.
1
Select [Menu] > [Phone setup] > [Silent
mode], then press [OK] to confirm.
2
Select [On/off], then press [OK] to
confirm.
» The setting is saved.
3
Select [Start & end], then press [OK] to
confirm.
4
Set the time, then press [OK] to confirm.
» The setting is saved.
is displayed.
»
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Key tone], then press [OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or charger.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Docking tone], then press [OK] to
confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
EN 23