Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Excel 30371
- Page 1 Original Instructions Cordless spray gun 18V 30371 INSTRUCTION MANUAL...
-
Page 2: Description Of The Symbols
Original Instructions DESCRIPTION OF THE SYMBOLS Read instructions carefully before any use Complies with relevant European regulations The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. - Page 3 Original Instructions GENERAL SAFETY WARNINGS FOR THE TOOL WARNING Read all safety warnings and instructions. Failure to follow all the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL THE WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
- Page 4 Original Instructions serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and /or battery pack, picking up or carrying the tool.
- Page 5 Original Instructions control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.
- Page 6 Original Instructions explosive environment. Do not spray near ignition sources such as static electric sparks, open flames, ignition flames,hot items,motors, cigarettes or sparks caused by plugging in/unplugging power cables or by operating switches.These ignition sources could ignite a fire in the environment. Do not spray any material if you do not know whether it is potentially dangerous.Unknown materials can cause hazardous conditions.
- Page 7 Original Instructions heavy insulation tape to ensure short circuit cannot occur. Batteries, when stored for a long period of time, will discharge. Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40°C such as alongside sheds or metal structures in the summer.
- Page 8 Original Instructions WARNING: Do not allow any liquid to come into contact with the charger. There is a danger of electric shock. The charger is not intended for any use other than charging the exact type of rechargeable battery pack as supplied with the charger. Any other use may result in the risk of fire, electric shock or electrocution.
-
Page 9: Intended Use
Original Instructions This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk. Never recharger a fully charged battery cartridge. Do not charge non-rechargeable batteries. Vibration and noise reduction To reduce the impact of noise and vibration emission,limit the time of operation,wear personal protective equipment. -
Page 10: List Of Main Parts
Original Instructions prohibited.And the appliance is only for domestic use and not intended for commercial use.Any other uses or modification to the product are deemed to be improper usage and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage(s) attributable to misuse. LIST OF MAIN PARTS Trigger Union nut... -
Page 11: Technical Specifications
Original Instructions TECHNICAL SPECIFICATIONS Product description 18V Li-ion Spray Gun Rated voltage of battery Tank capacity 1000ml Water flow rate 700ml/min Max. Viscosity 50 DIN-S Ф1.8mm & 2.6mm Plastic nozzle Sound pressure level L =3dB(A)) 75.2 dB(A) Sound power level L =3dB(A)) 86.2 dB(A) Level of vibration a... - Page 12 Original Instructions when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration, such as maintaining the tool and the accessories, keeping hands warm, adjusting work patterns to avoid risk of vibration.
- Page 13 Original Instructions The red light will go off after charging is complete and a green light will appear. CH-1802B/CH-1802D: See the manual of CH-1802B/CH-1802D NOTE: Batteries may become warm while charging. This is normal. If the battery is hot after continuous use in the tool, allow it to cool down to room temperature before charging.
- Page 14 Original Instructions NOTE Do not exceed the maximal viscosity of the appliance. The spray material must not be too thick. Otherwise, the appliance might clog. Ensure that the spray material and thinning agent are compatible. Using an unsuitable thinning agent may cause clots that clog the appliance. Never mix synthetic resin varnishes with cellulose thinners.
- Page 15 Original Instructions Fit the desired nozzle (b) onto the nozzle head (3). Screw the union nut (2) back onto the spray unit (8). Filling with spray materials Unscrew the paint cup (4) from the spray unit (8) . To work on a horizontal object, place the riser pipe (c) in front, facing the nozzle head (3) .To work overhead, place the riser pipe (c) at the back, facing the motor unit (6) .
- Page 16 Original Instructions distance is approx.15 cm. Work out the best settings by carrying out a test. Do not switch the appliance on/off over the spray surface. Rather, start/end the spraying process approx.10 cm from the spray surface. Switching on: To switch on, pull the trigger (1) and keep it in. Switching off: To stop spraying, simply release the trigger (1).
- Page 17 Original Instructions the air filter to dry. Proceed in reverse order in order to reassemble the appliance. Cleaning Avoid using solvents when cleaning plastic parts. Most plastic parts are susceptible to damage from various types of commercial solvents and may be damaged by their use.
- Page 18 Original Instructions Exceltools.co.uk Sales@exceltools.co.uk...
Need help?
Do you have a question about the 30371 and is the answer not in the manual?
Questions and answers