Onntrack Portable PRO+ User Manual page 6

About the tracker
The Onntrack® systems are fully ready for use; however, you need
to charge the tracker (+4 hours). Aer charging, you can turn on
the tracker by pressing and holding the POWER button located
next to the charging port.
The LED indicator will start blinking, indicating that the tracker is
searching for a signal. Place the tracker near a window or outside
to ensure a good signal reception. The lights will turn off after a
few minutes. This is normal and done to conserve battery power.
Taking the tracker into use
Step 1: Download the app: Onntrack
Onntrack Portable PRO+ - Manual EN 18072023
Grant permission to the
app for location access
and sending push
notifications during
installation.