Advertisement
Quick Links
Quark-Elec Application Note
QK-R022 Rolling Door Opener, Remote Control Switch
---12V/24V DC Motor Remote Control Application Notes
Features
Control DC Motor (Two Directions) through
Buttons on Remote Controller
License-free Frequency on 433Mhz
Self-learning Coding
Two Working Modes: Self-lock and Latching
Easy to Install and Configuration
Up to 700W Output Power Rate
Up to 200 Meters Control Range
Low Power Consumption
http://www.quark-elec.com
V1.0
Applications
Electric Doors,
Shutters, Garages
Electronic Certain/Blinds
DC Motors, Actuators
Plant Maintenance
Valve Control
Pumping Station
Oil/gas Pipelines Control
1 of 5
2015
Advertisement
Related Manuals for Quark-Elec QK-R022
Summary of Contents for Quark-Elec QK-R022
- Page 1 Quark-Elec Application Note QK-R022 Rolling Door Opener, Remote Control Switch ---12V/24V DC Motor Remote Control Application Notes Features Applications Control DC Motor (Two Directions) through Electric Doors, Buttons on Remote Controller Shutters, Garages License-free Frequency on 433Mhz Electronic Certain/Blinds ...
- Page 2 Quark-Elec Application Note NTRODUCTION QK-R022 series remote controller is an easy-installed device which can control electric doors, curtains/blinds, and another DC motor driven devices in smart house, industrial control, security industry area. Just press the buttons on the remote controller then the barriers and doors will be opened or closed, or the DC motor driven device will turn on or off.
- Page 3 TRANSMITTER PARING QK-R022 is an intelligent self-learning remote control receiver. It allows the operator paring the remote controller with QK-R022 by learning the communication code. Up to 30 remote controller can be paired with one QK-R022 can always release the paired remote controller by clearing the communication code. After this releasing process, all of the remote controller will lost the communication with paired QK-R022 until new learning process performed again.
-
Page 4: Specifications
4.2 Learn communication code 1. Press the ‘SET’ button on QK-R022, the LED light will turn on. Then press ‘up’ button on the remote controller, the LED will quickly blink for few seconds. Once the LED keeps light on, the transmitter code has been stored in QK-R022 and ‘Up’... - Page 5 Power rate on relay DC12V Remote controller battery voltage 12mA Remote controller working current For more technical information and enquires please go to Quark-elec forum: http://quark-elec.com/forum/ For sales and purchasing information, please email us: info@quark-elec.com Quark Electronics (UK) 24 Meadowbank Hitchin Herts.