Summary of Contents for Jroll X10
- Page 1 Jroll X10 User Manual 2023 X10, X10 Basics, X10 Colour, X10 Plus, Applies to Product Models: X10 Special Edition. Jroll X10 User Manual...
- Page 2 Welcome to the Jroll Family Proof of Purchase & Product Registration Always keep a copy of the sales receipt showing the date of purchase of your Jroll X10. Proof of purchase will assure you of in-warranty service. We recommend you register your Jroll X10 with us to ensure you enjoy our full warranty.
-
Page 3: Table Of Contents
5. First Time Use 13. Jroll APP Unboxing 14. Troubleshooting Charging the Battery Turning ON the Jroll X10 CHECK Loading the roll X10 with Paper Cones STUCK Insert and Weigh your Material CHARGE ME Grind & Mix LOCK Roll & ENJOY... -
Page 4: Symbols - Explanation
Note/Tip! This symbol gives you technical information or useful tips regarding the Jroll X10. Protect from direct sunlight and heat sources (such as ovens, heaters, etc.). WARNING Choking Hazard: Small parts. Not intended for children under 3 years. -
Page 5: Important Basic Rules
■ Be careful when you handle the Grind & Mix unit, the blades are very sharp. ■ If residue of spices or herbs sticks to the wall of the Grind & Mix unit, remove the unit from the Jroll X10 before cleaning. -
Page 6: Caution
■ Your Jroll X10 contains Lithium-ion batteries and should be recycled or disposed of in accordance with local requirements to avoid potential injury and/or environmental harm. ■ Do not dispose of the battery or any component of your Jroll X10 in a fire as it could cause an explosion or other serious injury. -
Page 7: Introduction
If these parts are assembled correctly, the built-in safety lock is unlocked. Intended Use The Jroll X10 is used to process herbs or spices or other dry plant variants, by grinding and mixing such material and depositing the ground mixture in portable Jtubes or paper cones (wrappers). The machine can be used for grinding and mixing of herbs or spices, for products used in cooking, aromatherapy or for consumption via inhalation (using paper cones). - Page 8 Grind & Mix unit. This can cause unwarranted damage and serious injury. Use only as intended. DO NOT let children use the X10 or any of its accessories. Store outside of the reach of children. Blades are sharp and the Jtubes contain small parts that can cause choking. Keep out of reach of children.
-
Page 9: What's In The Box
3. What’s in the Box Quick User Guide 1. Jroll X10 5. USB-C Charger with cable 2. 10 Jtubes 6. Cleaning Brush 3. 10 Jtube Caps 7. User Guide (concise) 4. Grind & Mix unit 8. Carry Case Jroll X10 User Manual... -
Page 10: Functional Overview
4. Functional Overview LED Display Door Touch Button WARNING: Do not apply pressure on the door to avoid damage to the component. Damage resulting from pressure is not covered by the warranty Jroll X10 User Manual... - Page 11 Front View Back View Top Button Jtube Jtube Socket USB-C Port ON/OFF Switch Main Button Scroll Menu Silicone Seal Jroll X10 User Manual...
- Page 12 Grind & Mix unit will slot in smoothly. Inserting the unit incorrectly can cause serious damage! NOTE: The Grind & Mix unit is the ONLY part of the Jroll X10 whereby water or a dishwasher can be used for cleaning purposes.
- Page 13 When placing the Jtubes in the Jroll X10, make sure the hole is facing you and gently place the Jtube into the Socket. Embedded magnets at the bottom of the Jtube assist with proper seating of the Jtube.
-
Page 14: First Time Use
Silicone Cover When switching ON the Jroll X10, you will be greeted with “HELLO” and the Jroll X10 will perform a status check to see how many Jtubes hold paper cones. The number of available cones is indicated by the Touch Button at the bottom of the Jroll X10. -
Page 15: Loading The Roll X10 With Paper Cones
Lid to scroll through the Menu and select “LOAD”. Next, press the Top Button. The Jroll X10 will now look for a Jtube that does not hold a paper cone. The Door will open and the Jtube will be ejected. Following, you can insert a paper cone into the Jtube. -
Page 16: Insert And Weigh Your Material
Insert and Weigh To insert your herbs or spices, remove the Lid from the Jroll X10. When the Lid gets your Material removed, the “SCALE” will be activated. When the display indicates “0.0”, proceed and insert your material. When you are done inserting the material, close the Lid. The Jroll X10 will automatically go into “GRIND”... -
Page 17: Settings Mod
The Jroll X10 enter standby mode after 2 minutes of no use. In the rare case you forgot to take out a filled paper cone, the Jroll X10 will take it back and store it for you. On you next ROLL, the already filled cone will be ejected. -
Page 18: The Menu
Shows charge level of battery Settings Menu Settings Messages Settings for changing the Stacking Level. Jroll X10 greets you when switched ON Low Stacking Level. Your cone is ready. Enjoy! Semi Stacking Level. Jroll X10 going to sleep (standby mode) High Stacking Level. -
Page 19: Cleaning & Maintenance
Cleaning the Main body For convenience, the Jroll X10 has a CLEAN mode. To use this mode, turn the Lid and scroll to “CLEAN”. In this mode, the Jroll X10 will eject in sequence, one by one the Jtubes (whereas in LOAD mode, only Jtubes that do not hold a paper cone are ejected). -
Page 20: Cleaning The Grind & Mix Unit
Spray isopropyl alcohol onto the dirty areas and use a brush / cotton swab / cotton cloth, together with warm rinsing water to remove residue. Lock NOTE: The Grind & Mix unit is the only part of the Jroll X10 whereby water or a dishwasher can be used for cleaning purposes Jroll X10 User Manual... -
Page 21: Removing The Bottom Tray
When you are done with cleaning, insert the Grind & Mix unit back into the Jroll X10, place the Lid and switch the Jroll X10 ON. The Door will close and the Jroll X10 will initiate a paper cone check (every time it is switched on). -
Page 22: Universal Charger
Place the Lid back and turn ON the Jroll X10 (without the Grind & Mix unit inside). Allow the start up to finish and put the Grind & Mix unit back into the machine, Place the Lid on the Jroll X10. If the gap persists, turn OFF the Jroll X10 and contact us at help@jroll.com. -
Page 23: Service
12. Intended Use The Jroll X10 is used to process herbs or spices or other dry plant variants, by grinding and mixing such material and depositing the ground mixture in portable Jtubes or paper cones (wrappers). The machine can be used for grinding and mixing of herbs or spices, for products used in cooking, aromatherapy or for consumption via inhalation (using paper cones/wrappers). -
Page 24: Troubleshooting
LOCK When the Jroll X10 is Locked, this message will appear on the display. To unlock, press and hold Touch Button at bottom of machine until “LOCK” is shown. Turn the Lid, select “UNLOCK” and press Top Button to unlock. -
Page 25: Certifications
(2) the machine must not be affected by incoming interference, including interference that may cause undesired operation The battery and charger of the Jroll X10 complies with the UL Certification requirements. UL Certification meaning (Underwriters Laboratories) is the most recognized safety testing and evaluation agency in the United States. -
Page 26: Warranty & Liability
Jroll Ltd. (“Jroll”) warrants the JROLL X10 against defects in materials and workmanship under normal use for a period of up to one (1) year from the date of retail purchase from jroll.com or an authorized Jroll retailer. This warranty is applicable to the original purchaser and is non-transferable. -
Page 27: Return Policy
To the extent permitted by applicable law(s), Jroll Ltd does not assume any liability for any loss of profit, loss of use of products, functionality, loss of business, loss of contracts, loss of revenues, loss of savings, increased cost or expenses, consequential loss or special loss or damage.
Need help?
Do you have a question about the X10 and is the answer not in the manual?
Questions and answers